Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

Estimation of the clutch pressure basing on reduced order model of the hydraulic actuator system

Globally Stable Pressure-Observer-Based Servo Control of an Electro-Pneumatic Clutch Actuator

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Disturbance observer based pressure control for electrohydraulic system

Hybrid Position/pressure Control of Hydraulic Press Based on Cascade Controller

Analysis and Modeling for Electro-pneumatic AMT System

Dynamic performance prediction and experimental analysis of wet clutch actuator considering thermal flow characteristics

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

Single neuron adaptive PID control for hydro-viscous drive clutch

The Design of Low Cost Valve-and-pump Compounded Pressure Control System for the Hydro Viscous Clutch

Modeling and Adaptive Control of the Electro-Hydraulic Braking System of Low-Floor Vehicle

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Comprehensive wheel cylinder pressure estimation based on systematic hydraulic control unit model

A Novel Method for Clutch Pressure Sensor Fault Diagnosis

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

Robust Output Feedback Controller with High-Gain Observer for Automatic Clutch

Study on Dynamic Torque PID Control for Automobile Diaphragm Spring Clutch Based on Kalman Filter

Dynamic coordinated control strategy of a dual-motor hybrid electric vehicle based on clutch friction torque observer

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

Precision Motion Control of Hydraulic Actuators with Performance Guaranteed Online Parameter Estimation

Adaptive torque control of wet dual clutch based on dynamic friction coefficient estimation