Abstract:Electrospinning is a manufacturing technique that can produce microfibers and nanofibers from polymeric solutions. It has a broad range of applications in areas such as tissue engineering, flexible electronics, filtering, etc. However, due to its chaotic behavior, the fibers obtained by this process are prone to high diameter variations. The high diameter variations will cause poor final product functionality. The diameter is affected by process variables, ambient conditions and in-situ measurements. It is therefore important to model their effect on the fiber diameter variation, which is rarely investigated in the literature. Towards this end, this paper systematically studies the electrospinning process of a biocompatible polymer (i.e., polyacrylonitrile (PAN) 10%) via experimental study and data-driven modeling. In particular, three critical process variables (i.e., voltage, tip-to-collector distance, and polymer flow rate), are varied in a central composite design of experiment. Twenty-four runs are executed for the data collection, during which the in-situ measurements are collected via a customized sensing system. After each experiment, scanning electron microscope (SEM) images are taken from the nonwoven mats and characterized to capture the diameter and the diameter variations. Three machine learning methods, Lasso, random forest (RF), and support vector machine (SVM), are applied to the collected data. The model performance is evaluated in the real case study on the electrospinning ofpolymeric solution. The most predictive model (RF) can yield an around 15% relative error for prediction in testing data on average over 100 replications.

The model of ring-spun slub yarn based on random fiber arrangement and its application: Part 2 Prediction of morphology parameters for slub yarn and simulation of slub fabric

A prediction method and its application for twist of slub yarn based on micro-element yarn

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Predictive Modelling-Based Design And Experiments For Synthesis And Spinning Of Bioinspired Silk Fibres

Computational modeling of the strength of staple yarn based on the random arrangement of fibers

Computer Simulation of Brocade Based on Modeling Structures

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Simulation on fiber random arrangement in the yarn part II: joint effect of fiber length and fineness distribution

Finite element modeling and simulation of yarn in winding process

Analytical Modelling of Dry-Jet Wet Spinning

Computational Simulation of Complex Structure Fancy Yarns

A Novel Kinematic Model for Molten Slag Fiberization: Prediction of Slag Fiber Properties

The Wicking Performance of Interlaced Silk Yarn Focusing on Yarn Parameters

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

Modeling and characterization of the mechanical properties of nanofiber yarn

Simulation-based setting suggestions for yarn winding units to reduce color variation in knitted fabric

Chan-Vese segmentation model for faster and accurate evaluation of yarn packing density

A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces