Abstract:Using microfabrication technologies is a prerequisite to create scaffolds of reproducible geometry and constant quality for three-dimensional cell cultivation. These technologies offer a wide spectrum of advantages not only for manufacturing but also for different applications. The size and shape of formed cell clusters can be influenced by the exact and reproducible architecture of the microfabricated scaffold and, therefore, the diffusion path length of nutrients and gases can be controlled.1 This is unquestionably a useful tool to prevent apoptosis and necrosis of cells due to an insufficient nutrient and gas supply or removal of cellular metabolites. Our polymer chip, called CellChip, has the outer dimensions of 2 x 2 cm with a central microstructured area. This area is subdivided into an array of up to 1156 microcontainers with a typical dimension of 300 m edge length for the cubic design (cp- or cf-chip) or of 300 m diameter and depth for the round design (r-chip).2 So far, hot embossing or micro injection moulding (in combination with subsequent laborious machining of the parts) was used for the fabrication of the microstructured chips. Basically, micro injection moulding is one of the only polymer based replication techniques that, up to now, is capable for mass production of polymer microstructures.3 However, both techniques have certain unwanted limitations due to the processing of a viscous polymer melt with the generation of very thin walls or integrated through holes. In case of the CellChip, thin bottom layers are necessary to perforate the polymer and provide small pores of defined size to supply cells with culture medium e.g. by microfluidic perfusion of the containers. In order to overcome these limitations and to reduce the manufacturing costs we have developed a new microtechnical approach on the basis of a down-scaled thermoforming process. For the manufacturing of highly porous and thin walled polymer chips, we use a combination of heavy ion irradiation, microthermoforming and track etching. In this so called "SMART" process (Substrate Modification And Replication by Thermoforming) thin polymer films are irradiated with energetic heavy projectiles of several hundred MeV introducing so-called "latent tracks" Subsequently, the film in a rubber elastic state is formed into three dimensional parts without modifying or annealing the tracks. After the forming process, selective chemical etching finally converts the tracks into cylindrical pores of adjustable diameter.

A three-dimensional (3D) printing approach to fabricate an isolation chip for high throughput in situ cultivation of environmental microbes

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

3D Printing Solutions for Microfluidic Chip-To-World Connections

Characterization and evaluation of 3D printed microfluidic chip for cell processing

Research on Integrated 3D Printing of Microfluidic Chips

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Printing 3D Microfluidic Chips with a 3D Sugar Printer

3D Microfabricated Bioreactors

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer

Microfabrication of chip-sized scaffolds for three-dimensional cell cultivation

A 'print-pause-print' protocol for 3D printing microfluidics using multimaterial stereolithography

Rapid Customization and Manipulation Mechanism of Micro-Droplet Chip for 3D Cell Culture

Replicating biological 3D root and hyphal networks in transparent glass chips

Breaking the Third Wall: Implementing 3D-Printing Techniques to Expand the Complexity and Abilities of Multi-Organ-on-a-Chip Devices

Rapid Fabrication by Digital Light Processing 3D Printing of a SlipChip with Movable Ports for Local Delivery to Ex Vivo Organ Cultures

3D embedded printing of microfluidic devices using a functional silicone composite support bath

Microarray Platforms Based on 3D Printing

Using 3D printing to fabricate microfluidic chips for biosensing applications

Chemical and Biochemical Analysis on Lab-on-a-chip Devices Fabricated Using Three-Dimensional Printing

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications

Fabrication of a modular tissue construct in a microfluidic chip