Depth investigation of the regulation mechanism of SiO 2 on the denitrification performance and sulfur resistance of MnCe/Ti SCR catalyst

Mengxia Qing,Linlin Zhang,Liang Liu,Yaxin Chen,Yunda Su,Sheng Su,Song Hu,Yi Wang,Jun Xiang
DOI: https://doi.org/10.1016/j.cej.2023.145852
IF: 15.1
2023-09-23
Chemical Engineering Journal
Abstract:The "deep peaking" of coal-fired units presents great challenges for SCR catalysts' de-NO x activity at wide temperatures. Mn-based catalysts have good de-NO x activity at low temperatures, but their poor sulfur resistance is one of the key issues affecting industrial applications. In this study, the effects of SiO 2 doping on the denitrification, sulfur resistance, and physicochemical performance of the MnCe/Ti catalyst were investigated. The results showed that SiO 2 improved the de-NO x activity of catalysts at high temperatures and enhanced SO 2 /H 2 O resistance at wide temperatures. Under short reaction time conditions, the MnCe/Ti 0.9 Si 0.1 catalyst exhibited the highest NO conversion rate at 400 °C, which was 33% higher than that of the MnCe/Ti catalyst. The NO conversion rates of Si-doped MnCe/Ti catalysts increased rapidly to over 85% (65% of the MnCe/Ti catalyst) as the reaction temperature increased from 200 °C to 250 °C under SO 2 -containing atmosphere due to the promoting effects of SiO 2 on the decomposition of ammonium bisulfate. MnCe/Ti 0.7 Si 0.3 catalyst exhibited the optimal sulfur and H 2 O resistance, with NO conversion rate higher than 85% with 600 min under SO 2 /H 2 O-containing atmospheres. SiO 2 inhibited the crystallization of anatase TiO 2 , and increased the specific surface area to 306.60 m 2 /g. Additionally, the ratios of Mn 4+ /Mn n+ and Ce 3+ /Ce m+ , and the surface adsorbed oxygen and weak-medium acid amount also increased due to the multiple interactions between the TiO 2 -SiO 2 and Mn/Ce, resulting in the higher de-NO x activity. Compared with the MnCe/Ti catalyst, Si-doped MnCe/Ti catalysts have lower SO 2(g) adsorption amount and the sulfation of Mn, and higher SO 3(a) desorption performance, resulting in better sulfur resistance at wide temperatures.
engineering, chemical, environmental
What problem does this paper attempt to address?