Abstract:The Wudongde arch dam is currently the thinnest 300-meter-class super-high arch dam in the world, and the risk of concrete cracking is a critical concern during its construction and operation. In this study, wedge-splitting fracture tests were conducted on full-graded and wet-sieved concrete specimens cast at the dam construction site, with varying test ages, specimen sizes, and crack lengths. A quantitative analysis was carried out to evaluate the impact of these factors on the fracture parameters of the dam concrete. Based on the test results, relevant theoretical models were used to predict the fracture loads and parameters of full-graded and wet-sieved concrete under different ages, sizes, and crack length conditions. The feasibility of predicting full-graded concrete fracture behavior using the results of wet-sieved concrete tests was also discussed. The findings indicate that age, size, and crack length all significantly affect the fracture parameters of dam concrete. When the ratio of ligament depth to maximum aggregate size reaches or exceeds 6, the initial fracture toughness, unstable fracture toughness, and fracture energy of both full-graded and wet-sieved concrete tend to stabilize. Using the boundary effect model, the size-independent fracture toughness, fracture strength, and scaling parameters of dam concrete can be determined, and the fracture loads, including initial cracking and maximum loads, can be accurately predicted under varying conditions of age, size, and crack length. In combination with the fracture extreme theory, accurate predictions of fracture toughness under different conditions can also be achieved. Validation results show that the absolute error between predicted and experimental values is generally within 15 %, indicating that this prediction method meets engineering requirements. By utilizing the results of wet-sieved concrete fracture tests, theoretical methods can effectively predict the fracture behavior of full-graded concrete. These findings can provide a scientific basis for crack risk analysis and control in the Wudongde arch dam.

Study on critical crack length of wet-sieved and full-graded concrete under mode I loading

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Experimental investigation and modified calculation model of critical crack propagation length of concrete

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical simulation of cracking of early-age concrete three-point beams

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Experimental study on fracture properties of self-compacting concrete

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Estimation of real fracture parameters of a dam concrete with large size aggregates through wedge splitting tests of drilled cylindrical specimens

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Mechanical properties and numerical simulation of crack interface in reinforced concrete

New concrete cracking model established based on fracture mechanics and damage theory

Fracture Behavior of Low-Heat Cement Concrete for Wudongde Arch Dam

A COMPARATIVE STUDY FOR CONCRETE FRACTURE ANALYSIS USING SMEARED-AND DISCRETE-CRACK MODEL

Experiments and simulation on the propagation of the juncture crack between gravel and mortar*

A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture

A Numerical Study of Crack Mixed Mode Model in Concrete Material Subjected to Cyclic Loading