Abstract:N-type polycrystalline higher manganese silicide ( MnSi 1.7) films are prepared on thermally oxidized silicon substrates by magnetron sputtering. MnSi 1.85, Si , and carbon targets are used in the experiments. By co-sputtering of the MnSi 1.85 and Si targets, n-type MnSi 1.7 films are directly obtained. By increasing the Si content to the deposited films, both the Seebeck coefficient and electrical resistivity increase to high values. A Si intermediate layer between the MnSi 1.7 film and substrate plays an important role on the electrical properties of the films. Without the interlayer, the Seebeck coefficient is not stable and the electrical resistivity is higher. For preparation of MnSi 1.7 films by solid phase reaction, a sandwich structure Si / MnSi x/ Si (x < 1.7) and thermal annealing are used. A carbon cap layer is used as a doping source. With the carbon doping, the electrical resistivity of the MnSi 1.7 film decreases, while the Seebeck coefficient increases slightly. For reactive deposition, the MnSi x (x < 1.7) film is directly deposited on the heated substrate with a Si intermediate layer. By using a Si cap layer, a MnSi 1.7 film with a Seebeck coefficient of -292 μ V/K and electrical resistivity of 23 × 10-3 Ω- cm at room temperature is obtained. The power factor reaches 1636 μW/mK2 at 483 K. With such a high power factor, the n-type MnSi 1.7 material may be superior to p-type MnSi 1.7 material for the development of thermoelectric generators. Several smaller (0.036 - 0.099 eV ) and intermediate (0.10 - 0.28 eV ) activation energies are observed from the curves of logarithm of the resistivity versus reciprocal temperature. The larger activation energies (0.35 - 1.1 eV ) are consistent with the reported energy band gaps for higher manganese silicides.

Selecting a Target for Obtaining Films of Higher Manganese Silicide Using Magnetron Sputtering

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

PREPARATION OF N-TYPE HIGHER MANGANESE SILICIDE FILMS BY MAGNETRON SPUTTERING

Magnetic properties, chemical and phase composition of thin manganese silicide films fabricated by pulsed laser deposition

Ultra-high Vacuum Deposition of Higher Manganese Silicide Mn4Si7 Thin Films

Thermal Process of Iron Silicides Prepared by Magnetron Sputtering

Investigation of Mn-doped Si films prepared by magnetron cosputtering

DEPOSITION OF <font>M</font>—<font>C</font> (<font>M</font> = <font>Cr</font>, <font>Mn</font>, <font>Fe</font>) FILMS BY MAGNETRON SPUTTERING

Combinatorial sputter deposition of CrMnFeCoNi high entropy alloy thin films on agitated particles

Formation of Highly Textured Zn0.2Ni0.8Mn2O4 Thin Films by RF Magnetron Sputtering

Grain Size Effect on the Phase Transformations of Higher Manganese Silicide Thermoelectric Materials: an in Situ Energy Dispersive X-Ray Diffraction Study

Structure And Magnetic Properties In Mn-Doped Si

Cosputtered Mn-doped Si Thin Films Studied by X-Ray Spectroscopy

Performance of a Planar Magnetron Sputtering Apparatus with Complex Targets

Preparation of Silicon Oxide Films by a Hot-Target Impulse Magnetron Deposition in a Reactive Mixture

Mn-Si Films Fabricated by Low Energy Ion Beam Deposition

Ni-Mn-Ga films in the austenite and the martensite structures at room temperature: Uniaxial texturation and epitaxial growth

Deposition of M-C (M = Cr, Mn, Fe) films by magnetron sputtering

Fabricacion de un magnetron sputtering para deposito de peliculas nanometricas magneticas

Facilitating Complex Thin Film Deposition by Using Magnetron Sputtering: A Review

Optical and mechanical properties of amorphous Mg-Si-O-N thin films deposited by reactive magnetron sputtering