Abstract:ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO2 electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO2 electrolysis with emphasis on industrial relevance.The CO2 molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO2 electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO2 reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO2 to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO2 reduction.Direct CO2 electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO2 concentration in flue gas is only 6-15%, posing a significant challenge for CO2 electrolysis. On the other hand, direct electroreduction of CO2 in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO2 concentration (6-15%), and potentially toxic impurities. Surface CO2 enrichment catalysts with high O2 tolerance could be viable for achieving direct CO2 electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO2 stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.

Cascade CO2 electroreduction enables efficient carbonate-free production of ethylene

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer

Carbon‐Efficient CO2 Electrolysis to Ethylene with Nanoporous Hydrophobic Copper

Cascade Electrocatalytic and Thermocatalytic Reduction of CO2 to Propionaldehyde

Efficient Ethylene Electrosynthesis Through C–O Cleavage Promoted by Water Dissociation

Continuous Carbon Dioxide Electroreduction to Concentrated Multi-carbon Products Using a Membrane Electrode Assembly

Efficient electrically powered CO2-to-ethanol via suppression of deoxygenation

Cascade Conversion of CO2 to Ethylene Carbonate under Ambient Conditions

Remodelling the chlor-alkali electrolysis process to co-generate useful reduction products from CO2

Electro-Driven Multi-Enzymatic Cascade Conversion of CO2 to Ethylene Glycol in Nano-Reactor

Electrocatalytic reduction of CO2 to ethylene and ethanol through hydrogen-assisted C–C coupling over fluorine-modified copper

Constraining CO coverage on copper promotes high-efficiency ethylene electroproduction

A cascade of in situ conversion of bicarbonate to CO2 and CO2 electroreduction in a flow cell with a Ni-N-S catalyst

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

Selective Ethylene Production from CO2 and CO Reduction via Engineering Membrane Electrode Assembly with Porous Dendritic Copper Oxide

Economically viable CO2 electroreduction embedded within ethylene oxide manufacturing

Electrocatalytic CO2 Reduction to Ethylene: from Advanced Catalyst Design to Industrial Applications

Cascade Conversion of CO 2 to Ethylene Carbonate under Ambient Conditions

High‐rate and Selective CO2 Electrolysis to Ethylene via Metal‐Organic Framework‐augmented CO2 Availability

CO 2 Electrolysis System under Industrially Relevant Conditions

Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces