Abstract:High dip angle reservoirs are affected by gravity, resulting in poor sweep performance at the middle and high parts during waterflooding development. Previous studies have proposed top gas injection development for this type of reservoir, which has provided direction for improving the development effect of such reservoirs. However, current research efforts have mainly focused on the analysis of gas injection effects, rather than delving deeper into the gas injection mechanism and its influencing factors. Furthermore, the research methods adopted thus far have been primarily theoretical and fail to take into account the typical characteristics of high dip reservoirs in actual oilfields. Using a similarity criterion, this study establishes a high-temperature and high-pressure physical simulation device with variable inclination to analyze the impact of gas injection under various water injection conditions on the development of high dip reservoirs. The results suggest that the earlier the injection of water and gas, the slower the overall increase in water cut, and the more distinct the oil wall effect after gas injection, leading to a higher ultimate recovery. In the experiments, earlier injection timing can increase the final recovery rate by 9.59%. In addition, a visualized physical simulation device with an adjustable inclination angle has been established to analyze the sweep performance of high dip reservoirs under various gas injection timings. It is concluded that energy supplement in the early stage of pressure decline in the reservoir resulted in a more uniform movement of the oil-water interface at the bottom and the oil-gas interface at the top, and reduced the probability of water and gas channeling. The overall displacement efficiency is found to be improved with this approach. Earlier injection timing increased sweep efficiency by 5.95% and recovery efficiency by 13.2%, respectively. The injection gas source determined in this study, which is associated gas, is beneficial for low carbon plan and exhibits satisfactory oil recovery. The development of high dip reservoirs through top gas injection in combination with bottom water injection can generate a synergistic effect, which significantly enhances sweep efficiency and ultimate oil recovery. This finding provides theoretical guidance for practical implementation in the field.

Effects of gas injection combined with wettability alteration on boundary water inrush

Gas Injection Test of Remolded Saturated Soil with Consolidation

Characteristics of gas–water flow during gas injection in two-dimensional porous media with a high-permeability zone

Experimental study of the characteristics of gas-injection barrier in two-dimensional porous media

Gas and water distribution characteristics of water-driven gas process in tight sandstone gas reservoirs: A microscale study by molecular simulation and experiment

Pore-scale Simulation of Gas Displacement after Water Flooding Using Three-Phase Lattice Boltzmann Method

Physical Simulation of Gas Injection Mechanism for High Dip Reservoir

Water invasion and remaining gas distribution in carbonate gas reservoirs using core displacement and NMR

Experimental Study of the Dynamic Water–Gas Ratio of Water and Gas Flooding in Low-Permeability Reservoirs

Quantitative evaluation of water-alternative-natural gas flooding in enhancing oil recovery of fractured tight cores by NMR

Experimental study on alleviating water-blocking effect and promoting coal gas desorption by gas wettability alteration

Experimental Study of Water Effects on Gas Desorption During High-Pressure Water Injection

Behavior and mechanism of water imbibition and its influence on gas permeability during hydro-fracturing of a coalbed methane reservoir

Experimental Study on Water Shutoff Technology Using In-Situ Ion Precipitation for Gas Reservoirs

Hysteresis effect of three-phase fluids in the high-intensity injection–production process of sandstone underground gas storages

Experimental investigation of permeability heterogeneity impact on the miscible alternative injection of formation Brine–Carbon dioxide

The effect of gas injection velocity and pore morphology on displacement mechanisms in porous media based on CFD approach

Study on the Mechanism of Water Blocking in Tight Sandstone Gas Reservoirs Based on Centrifugal and Nuclear Magnetic Resonance Methods

Impacts of Pore Size Distribution on Gas Injection in Intraformational Water Zones in Oil Sands Reservoirs

Interfacial evolution and migration characteristics of acid gas injected into a saline aquifer

Monitoring of Flooding Characteristics with Different Methane Gas Injection Methods in Low-Permeability Heterogeneous Cores