Abstract:AbstractThe application of horizontal well drilling coupled with the multistage fracturing technology enables commercial development of shale gas formations. To optimize the shale gas development, the transient gas flow in a shale formation is of great research interest. Due to anano-scale pore radius, the gas flow in shale matrix may fall in flow regimes which include viscous flow, slip flow and Knudsen diffusion. On top of that, gas adsorption/desorption and stress-sensitivity are some other important phenomena in shales. In this paper, we introduce a novel numerical simulation scheme to depict the above phenomena and predict the gas production from a multi-stage fractured horizontal well, which is crucial for the shale gas development.Instead of Darcy's equation, we implement the apparent permeability in the continuity equation to depict the gas flow (viscous flow, slip flow and Knudsen diffusion) in shale matrix. An adsorption/desorption term is included in the continuity equation as an accumulation term. A sink which is based on Peaceman's well model is placed at the center of the fracture cell. Uniform fluid flow from matrix to fractures is assumed. Only viscous flow is considered in the fractures and the permeability of the fractures doesnot change with pressure. The model is validated via comparing with an infinity-conductivity fracture model. Moreover, the lab data of Eagle Ford shale which provides the relationship between matrix permeability and the effective stress is integrated into the two-way coupling geomechanical process to simulate a stress-sensitive shale formation. Furthermore, the Langmuir and BET models will be compared to investigate the detailed adsorption/desorption process.This methodology examines the influence of each mechanism for the transient shale gas flow. Instead of conventional pressure-independent Darcy permeability, the apparent permeability increases with the development of a shale gas reservoir, which leads to higher productivity. With the gas adsorption/desorption, the reservoir pressure is maintained via the supply of released gas from nano-scale pore wall surfaces, which also leads to higher gas production. In addition, it yields a 5% difference for the cumulative production for one yearbetween the Langmuir and BET models. With the consideration of geomechanics, the apparent permeability is decreased due to the compaction of nano-scale pores, which leads to a decrease in productivity. Due to the difference of compaction magnitude for each grid block, geomechanics creates additional heterogeneity for anano-pore network in a shale formation, which we should pay more attention to.A novel methodology is introduced to examine the crucial phenomena in a shale formation, which simultaneously takes into account the influence of flow regimes, gas adsorption/desorption and stresssensitivity. On top of that, the productivity of a multi-stage fractured horizontal well is quantified. We provide an effective way to quantify the above effects for the transient gas flow in shale formations.

Hysteresis effect of three-phase fluids in the high-intensity injection–production process of sandstone underground gas storages

Change mechanism of pore structure and filling efficiency during injection production of sandstone underground gas storage

Quantitative characterisation of gas loss and numerical simulations of underground gas storage based on gas displacement experiments performed with systems of small-core devices connected in series

Fluid-solid Coupling Numerical Simulation of Injection-production Development of Tight Sandstone Reservoirs

Lost Gas Mechanism and Quantitative Characterization during Injection and Production of Water-Flooded Sandstone Underground Gas Storage

Characterization of Extra Low-Permeability Conglomerate Reservoir and Analysis of Three-Phase Seepage Law

Gas-Water Two Phase Flow Simulation Based on Pore Network Model for Reservoir Rocks

Study on multi‐cycle gas‐water displacing mechanism in underground gas storage of low‐permeability reservoir based on PNM

Experimental Study on the Permeability Variation of Sandstone at Cyclic Stress: Implication for Underground Gas Storage

Numerical simulation of underground hydrogen storage converted from a depleted low-permeability oil reservoir

Impact of Three‐Phase Relative Permeability and Hysteresis Models on Forecasts of Storage Associated with CO2‐EOR

Experimental study on reservoir particle migration induced by the injection-production process of underground gas storage

Experiment and Prediction of Enhanced Gas Storage Capacity in Depleted Gas Reservoirs for Clean Energy Applications

Numerical Simulation of Gas Leakage in Bedded Salt Rock Storage Cavern

Experimental Study on the Effects of Pore Pressure and Slippage on the Permeability of a Fracture Network during Depressurization of Shale Gas Reservoir Production

Determination of gas-water seepage characteristics with consideration of dynamic pore-throat structure in a tight sandstone gas formation

An Integrated Numerical Simulation Scheme to Predict Shale Gas Production of a Multi-Fractured Horizontal Well

Variations in Hydraulic Properties of Sendimentary Rocks Induced by Fluid Injection: the Effect of Water Pressure

Life cycle integrated flow simulation for hydraulic fracturing horizontal wells in shale gas reservoirs

Influence of injection and withdrawal rates on hydrogen distribution in sandstone: Implications for hydrogen storage in porous reservoirs