Abstract:Additive manufacturing (AM) is used in many fields and is a method used to replace wood components or wood-jointed furniture components in the furniture industry. Replacing wood joints by 3D printed connectors would be an advantage, considering the fact that during the process of assembling furniture, the execution technology of the joints is difficult, time-consuming, and labor-intensive. Advanced technology of AM applied in furniture manufacturing helps the designers to create new concepts of product design, with no limits of shape, number of joints, color, or size. The diversity of 3D printers and AM technologies provides the selection of materials in relation with the applicability of the 3D printed object. In this respect, the objective of the present research is to design a 3D printed connector to be used for jointing three chair components, namely the leg and two stretchers made from larch (Larix decidua Mill.) wood, and to use reinforced polylactic acid (PLA) fiberglass (20 wt. %) filament for 3D printing this connector using AM with fused filament fabrication (FFF) technology. The design of the connector, the possibility of using this type of material, and the deposition method of filament were investigated in this research. For this purpose, several evaluation methods were applied: microscopic investigation with 50×, 100×, and 200× magnifications, both of the filament and of the 3D printed connector; mechanical testing of corner joint formed with the help of connector between chair leg and the two stretchers; and a microscopic investigation of the connectors’ defects that occurred after applying the compression and tensile loads on the diagonal direction of the L-type joint. The microscopic investigation of the composite filament revealed the agglomerations of glass fibers into the core matrix and areas where the distribution of the reinforcements was poor. The heterogeneous structure of the filament and the defects highlighted in the 3D printed connectors by the microscopic investigation contributed to the mechanical behavior of L-type connecting joints. The bending moments resulting from compression and tensile tests of the 3D printed connectors were compared to the results recorded after testing, under the same conditions, the normal mortise–tenon joint used to assemble the abovementioned chair components. The larch wood strength influenced the mechanical results and the conclusions of the microscopic investigations, as well as the analysis of the broken connectors after testing recommended the change of connector design and filament deposition direction.

Comparative study on the bending moment capacity and stiffness of innovative and traditional furniture corner joints

The design and evaluation of three-dimensional corner joints used in wooden furniture frames: Experimental and numerical

Tensile Performance of Traditional and Modern Corner Joints in Wooden Structures

Performance of Wood Dowels and Same Size Metallic Connectors Used for Furniture Joints

Experimental study of the static behavior of tubular N-joints

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

Bending Moment of Mortise-and-Tenon Joints in a Crossed Chair Base

Rotational Stiffness and Carrying Capacity of Timber Frame Corners with Dowel Type Connections

A Parametric Optimized Method for Three-Dimensional Corner Joints in Wooden Furniture

Application of 3D Printing Technology in Furniture Construction

Mechanical performance analysis of double-dovetail joint applied to furniture T-shaped components

Study on Joint Model Simplification for Finite Element Analysis of Bamboo/Wood-Oriented Strand Board Furniture

Numerical and Optimal Study on Bending Moment Capacity and Stiffness of Mortise-and-Tenon Joint for Wood Products

Tensile and Bending Strength of Birch and Beech Lamellas Finger Jointed with Conventional and Newly Developed Finger-Joint Profiles

Reliability measurements of the furniture frames with selected joint types

3D Printing Application in Wood Furniture Components Assembling

Experimental Study on the Traditional Timber Mortise-Tenon Joints

Numerical and Experimental Analysis of the Rotational Stiffness of a Timber Semi-Rigid Dowel-Type Connection

Effects of Joint's Rigidity on the Capacity of Gabled Frames

Study on the strength mechanism of the wooden round-end mortise-and-tenon joint using the digital image correlation method

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study