Abstract:Biodegradable magnesium (Mg)-based alloys emerge as potential intracorporeal implants for clinical application in bone tissue, the cardiovascular and the nervous systems. The surfaces of control (non-sterilized) and sterilized (180 °C 1 h) Mg ZX10 alloy were studied. The alloy evolution in SBF (simulated saline solution) and in DMEM (Dulbecco's Modified Eagle Medium) with fetal calf serum (FCS) was investigated using: Raman spectroscopy , FTIR-ATR, electrochemical assays and scanning electron microscopy (SEM). The Mg ZX10 microstructure analysis revealed an average grain size of 23.4 ± 11.02 and 31.6 ± 13.07 μm, considering the minor and major axis, respectively. In addition, the Mg ZX10 microstructure exhibited a homogeneous grain distribution. The contact angle formed between the water and the surface of control Mg ZX10 and sterilized were 32.24° ± 1.53 and 46.76° ± 0.83, respectively. Consequently, both groups of samples exhibited hydrophilic surfaces. Furthermore, the free surface energy of control Mg ZX10 was 63.23 ± 0.72 mN/m and sterilized Mg ZX10 was 52.31 mN/m ± 1.25, those energy values were in agreement with previous reports. Upon immersion in SBF, Raman spectroscopy detected the presence of magnesium oxides-hydroxides, phosphates and carbonates compounds in both groups of samples without significant differences. FTIR spectra of the sterilized alloys, after immersion in DMEM + FCS, showed the presence of amide and carbon-carbon bonds, magnesium-oxides, as well as phosphates and carbonates groups. These findings suggested the deposition of organic and inorganic compounds on the alloy surface. Electrochemical assays carried out in SBF demonstrated a slight reduction in the degradation of the sterilized alloy compared to control Mg ZX10. Moreover, a substantial decrease in the corrosion behavior of the sterilized alloy immersed in DMEM + FCS with respect to the same alloy immersed in SBF was observed. SEM images showed that the alloy, previously immersed in SBF, exhibited degradation cracks. Contrary, the sterilized alloy surface immersed in DMEM + FCS was more homogenous with deposits of structures similar to hybrid nanoflowers . Based on these results, this sterilization process does not alter the chemistry of Mg ZX10 alloy surface and, even, its application exhibits an advantage since the high corrosion rate of Mg in physiological media. Furthermore, the organic-inorganic structures adsorbed, after alloy immersion in DMEM + FCS, could decrease corrosion behavior.

Superficial Modification of the Mg–Zn Biomaterials via Ion Nitriding for Biomedical Applications

The Properties Evolution of Medical Mg–Zn Alloys Prepared by Semi-solid Powder Moulding

Effect of Zr content on the microstructure, mechanical properties, electrochemical behavior, and biocompatibility of Mg–3Zn–xZr alloy using powder metallurgy

Evaluation of As‐extruded Ternary Zn–Mg–Zr Alloys for Biomedical Implantation Material: in Vitro and in Vivo Behavior

Dual Ions Implantation of Zirconium and Nitrogen into Magnesium Alloys for Enhanced Corrosion Resistance, Antimicrobial Activity and Biocompatibility

Corrosion Behavior and Surface Modification of Mg-Zn Implant Alloys

Advanced Zinc–Magnesium Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering

In Vitro Degradation Performance and Biological Response of a Mg–Zn–Zr Alloy

Microstructure and in vitro degradation performance of Mg-Zn-Mn alloys for biomedical application

High-performance Mg-Zn alloy achieved by the ultrafine grain and nanoparticle design

Effect of Ag and Cu Content on the Properties of Zn-Ag-Cu-0.05Mg Alloys

Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg–1.5Y–1.2Zn–0.44Zr Alloys for Biodegradable Metallic Implants

Synthesis and Properties of Mg-Mn-Zn Alloys for Medical Applications

Effects of Ag, Cu or Fe addition on microstructure and comprehensive properties of biodegradable Zn-Mg alloy

Mg ZX10 alloy for biomedical applications: Surface characterization and comparative corrosion studies under simulated biological conditions

A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying

Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties

Enhanced initial biodegradation resistance of the biomedical Mg-Cu alloy by surface nanomodification

Effects of Surface Alloying on Electrochemical Corrosion Behavior of Oxygen-Plasma-modified Biomedical Magnesium Alloy

Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy

A novel biodegradable Mg-1Zn-0.5Sn alloy: Mechanical properties, corrosion behavior, biocompatibility, and antibacterial activity