Abstract:Abstract In recent years, along with the development and application of magnesium alloys, magnesium alloys have been widely used in automotive, aerospace, medicine, sports, and other fields. In the field of medical materials, magnesium not only has the advantage of light weight, high strength, and a density similar to that of human bone, but also has good biocompatibility and promotes the growth of human bone. However, the mechanical properties and corrosion resistance of magnesium alloys need to be further improved to meet the requirements for human biodegradable implants. In this study, three alloys (mass fractions: Mg–10Zn, Mg–20Zn, and Mg–30Zn (wt.%)) were prepared using powder metallurgy by homogeneously mixing powders of the above materials in a certain amount with magnesium as the substrate through the addition of zinc elements, which also have good biocompatibility. The effect of zinc on the microstructure, mechanical properties, wear performance, and corrosion resistance of magnesium–zinc alloys was studied when the zinc content was different. The results show that compared with the traditional magnesium alloy using powder metallurgy, prepared magnesium alloy has good resistance to compression and bending, its maximum compressive stress can reach up to 318.96 MPa, the maximum bending strength reached 189.41 MPa, and can meet the mechanical properties of the alloy as a human bone-plate requirements. On the polarization curve, the maximum positive shift of corrosion potential of the specimens was 73 mv and the maximum decrease of corrosion-current density was 53.2%. From the comparison of the above properties, it was concluded that the three prepared alloys of which Mg–20% Zn had the best overall performance. Its maximum compressive stress, maximum bending strength, and corrosion-current density reached 318.96 MPa, 189.41 MPa and 2.08 × 10 −5 A·cm −2 respectively, which are more suitable for use as human implant bone splints in human-body fluid environment.

A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying

Preparation and Characterization of Laser-Melted Mg–Sn–Zn Alloys for Biomedical Application

Influence Of Alloying Treatment And Rapid Solidification On The Degradation Behavior And Mechanical Properties Of Mg

Selective Laser Melting of Zn–Ag Alloys for Bone Repair: Microstructure, Mechanical Properties and Degradation Behaviour

Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy

Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties

Alloying design of biodegradable zinc as promising bone implants for load-bearing applications

The Microstructure, Mechanical Properties and Degradation Behavior of Laser-Melted Mg-Sn Alloys

Investigation on the preparation, microstructure, mechanical and degradation properties of laser additive manufactured Zn-Li-Mg alloy for bioresorbable application

Oxides improve the strength of Zn-0.5Mn-0.5Mg alloys proceeded by laser powder bed fusion

Dual Alloying Improves the Corrosion Resistance of Biodegradable Mg Alloys Prepared by Selective Laser Melting

Biodegradable Zn-Mn Alloys with Suitable Mechanical Strength, High Plasticity, and Good Osteogenic Activities for Orthopedic Applications

Remarkably Enhancing Mechanical and Degradation Performance of Cast MgZn1.2 Alloys Via Small Amount Addition of Zirconium Combined with Hot Extrusion for Orthopedic Applications

In Vitro Studies on Mg-Zn-Sn-Based Alloys Developed As a New Kind of Biodegradable Metal

High-performance Mg-Zn alloy achieved by the ultrafine grain and nanoparticle design

Quasicrystal-strengthened biomedical magnesium alloy fabricated by laser additive manufacturing

Refined Lamellar Eutectic in Biomedical Zn–Al–Zr Alloys for Mechanical Reinforcement

Achieving Ultra-High Strength and Ductility in Mg–9Al–1Zn–0.5Mn Alloy Via Selective Laser Melting

In Vitro and in Vivo Studies on Biomedical Magnesium Low-Alloying with Elements Gadolinium and Zinc for Orthopedic Implant Applications

Effects of Sn on the microstructural evolution, mechanical properties and biodegradability of Zn alloys prepared by spark plasma sintering for bone repair

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibility