Abstract:A new multifunctional additive, two‐dimensional poly(triazine imide), increases Nafion membrane proton conductivity by 37% and 67% under high and low relative humidity conditions, respectively. Directed polymer aggregate alignment improves long‐range connectivity while acid‐base pairing facilitates proton hopping. This increases current/power densities by over 55%, which is retained after accelerated stress testing in proton exchange membrane (PEM) fuel cells. Although proton exchange membranes (PEMs) are widely deployed in an array of commercial applications, limitations linked to their proton conductivity, water retention, and gas permeability still limit ultimate device performance. While ex situ studies have shown additives can enhance membrane stability and mass transport, to date few have demonstrated that these performance enhancements are maintained when tested in commercially relevant electrochemical technologies, such as fuel cells or electrolyzers. Herein, a new multifunctional additive, 2D poly(triazine imide) (PTI), is demonstrated for composite PEMs, which is shown to boost proton conductivity by 37% under optimal high relative humidity (RH) conditions and 67% at low RHs. PTI also enables major improvements (over 55%) in both current and power densities in industrially relevant PEM fuel cells (PEMFCs). Most importantly, in situ and ex situ characterization suggests that the enhanced performance is due to polymer aggregate‐PTI clusters that form with increasing 2D character and improved long‐range connectivity, while acid‐base interactions with pyridinic nitrogen facilitate the critical proton hopping mechanism at all RHs. Hence, this work offers both a new membrane concept with proven benefits for important electrochemical technologies, as well as design principles for future optimization of proton transport and water management within PEMs.

New triazinephosphonate dopants for Nafion proton exchange membranes (PEM)

Nafion Matrix and Ionic Domain Tuning for High‐Performance Composite Proton Exchange Membranes

Incorporating Phosphoric Acid-Functionalized Polydopamine into Nafion Polymer by in Situ Sol-Gel Method for Enhanced Proton Conductivity

Syntheses, Structures and Proton Conductivities of Polyphthalazinone Ionomers Derived from a Direct NC Coupling Reaction

Anhydrous proton conducting composite membranes containing Nafion and triazole modified POSS

Promoting proton conduction performance of Nafion composite membrane through doping simple and low-cost hydrated calcium terephthalate

Nafion Composite Membranes Impregnated with Polydopamine and Poly(Sulfonated Dopamine) for High-Performance Proton Exchange Membranes.

Supramolecular Modifying Nafion with Fluoroalkyl‐Functionalized Polyoxometalate Nanoclusters for High‐Selective Proton Conduction

A Novel Proton Exchange Membrane Prepared from Imidazole Metal Complex and Nafion for Low Humidity

Proton Exchange Membranes Based on Semi-Interpenetrating Polymer Networks of Fluorine-Containing Polyimide and Nafion®

The Incorporation of Sulfonated PAF Enhances the Proton Conductivity of Nafion Membranes at High Temperatures

2-Substituted Imidazole Derivatives Doped Nafion Membrane for High Temperature Anhydrous Application and Their Performance

Synergistically promoted proton conduction of proton exchange membrane by phosphoric acid functionalized carbon nanotubes and graphene oxide

Anisotropic membrane with high proton conductivity sustaining upon dehydration

Trifluoromethanesulfonimide-based hygroscopic semi-interpenetrating polymer network for enhanced proton conductivity of nafion-based proton exchange membranes at low humidity

Proton exchange membranes based on semi-interpenetrating polymer networks of Nafion ® and poly(vinylidene fluoride) via radiation crosslinking

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes

Fuel 109-New Proton Conductive Composite Materials with Inorganic and Styrene Grafted and Sulfonated Vdf/Ctfe Fluoropolymers

Sulfonamide-Sulfonimide Copolymers as Novel, Fluorine-Lean Type of Proton Exchange Membranes for Fuel Cell Application

Facilitating Proton Transport in Nafion-Based Membranes at Low Humidity by Incorporating Multifunctional Graphene Oxide Nanosheets

Polyamide-coated Nafion Composite Membranes with Reduced Hydrogen Crossover Produced Via Interfacial Polymerization