Abstract:Using polyoxometalate moieties we are developing proton conducting membranes for proton exchange membrane fuel cells, electrolyzers and other devices that can solve the durability and environmental challenges and temperature limitations facing the state of the state-of-the-art perfluorinated sulfonic acid-based membranes. During recent work with perfluorinated membranes we have shown how to achieve stability enhancement that easily exceeds the Fuel Cell DOE accelerated stress tests (AST) for chemical stability and mechanical durability requirements for light duty vehicles. This indicates the potential of these For this perfluorinated polymer-HPA combination we obtained higher performance than the current state-of-the-art PFSAs under high humidity conditionsHPA moieties to give oxidative stability to hydrocarbon membranes as well. New membrane technology we are working on will utilize covalently bound heteropoly acids (HPA), inorganic super acids, that have both some of the highest proton conductivities when wet and have been proven to catalytically decompose oxygenated radicals that destroy existing membranes. We have already demonstrated similar membranes in fuel cells with high performance and some of the most stable long term durability ever demonstrated. In fuel cells, the materials always performed beyond state-of the-art when in humid conditions but struggled when the cells became dry, as electrolysis applications feeds water to the cell we have very high confidence that we will be able to easily exceed electrolyzer performance targets. We are improving upon this polymer chemistry and are now tailoring it specifically to electrolysis. When configured correctly within a hydrocarbon polymer membrane these HPA-hydrocarbon polymers will outperform perfluorosulfonic acid (PFSA) polymers. The correct HPA chemistry must be chosen, and we have shown that silicotungstic acid derivatives act as strong proton conducting moieties and also catalytically decompose oxygenated radicals. This will then enable hydrocarbon membranes with practical lifetimes and performance using the silicotungstic functionality. We are aiming to control the HPA channel morphology and allow for maximum proton conductivity with minimum water uptake. The engineered structures will facilitate proton conduction from ambient conditions to temperatures in excess of 120°C (the polymeric materials chosen are stable to 200°C when dry and potentially much higher when wet and pressurized), as well as achieving cost and durability targets for PEM membranes in electrolyzer applications. Our approach will also allow for development of an ionomer for optimal interfacing with the electrodes.

Protic poly(diallylmethylammonium) poly(ionic liquid)s proton exchange membranes with low fluorine content

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Poly(olefin)-Based Anion Exchange Membranes Prepared Using Ziegler–Natta Polymerization

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Dumbbell‐Shaped, Block‐Graft Copolymer with Aligned Domains for High‐performance Hydrocarbon Polymer Electrolyte Membranes

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

Sulfonamide-Sulfonimide Copolymers as Novel, Fluorine-Lean Type of Proton Exchange Membranes for Fuel Cell Application

Fluorinated poly(p-triphenyl piperidine) anion exchange membranes with robust dimensional stability for fuel cells

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications

High Performance Cross-Linked Poly(2-acrylamido-2-methylpropanesulfonic acid)-Based Proton Exchange Membranes for Fuel Cells

Low boiling point solvent-soluble, highly conductive and stable poly (ether phenylene piperidinium) anion exchange membrane

(Keynote) Polyoxometallate Functionalized Membranes for Next Generation Fuel Cells, Electrolyzers and Other Devices

Sulfonated poly(ether ether ketone)-Protic ionic Liquid-Based anhydrous Proton-Conducting composite polymer electrolyte membranes for High-Temperature fuel cell applications

Enhanced performance of poly(olefin)-based anion exchange membranes cross-linked by triallylmethyl ammonium iodine and divinylbenzene