Abstract:Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions. Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions.

Effect of method of preparation of Ni and/or Cu supported on ZSM-5 catalysts for the aqueous phase hydrogenation of levulinic acid to γ-valerolactone

Hydrogenation of Levulinic Acid over Nickel Catalysts Supported on Aluminum Oxide to Prepare Γ-Valerolactone

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Catalytic Hydrogenation of Levulinic Acid to Gamma-Valerolactone over Ni/ZrO2

Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Mesoporous Silica-Supported Cu-Ni Composite Catalysts

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Preparation of Ni/SiO<sub>2</sub> catalyst in ionic liquids for hydrogenation

Solvent‐Free Efficient Hydrogenation of Levulinic Acid over Silicotungstic Acid Promoting the Activity of CuNiAl Catalysts: A Synergistic Effect

The Formation of γ-Valerolactone from Renewable Levulinic Acid over Ni-Cu Fly Ash Zeolite Catalysts

Role of the Cu-ZrO2 interface in the hydrogenation of levulinic acid to γ-valerolactone

Enhanced catalytic performance of ethyl-levulinate to γ-valerolactone: Effect of copper loading on Ni/KIT-5 catalyst

SSZ-39 zeolite-based Ru catalysts for selective hydrogenation of levulinic acid to γ-valerolactone: Influence of synthesis method and zeolite acidity

Synthesis of Γ-Valerolactone from Ethyl Levulinate Hydrogenation and Ethyl 4-Hydroxypentanoate Lactonization over Supported Cu-Ni Bimetallic, Bifunctional Catalysts

High Specific Surface Area Silica Nanorod Supported Bimetallic NiCu Effectively Catalyzes Levulinic Acid Hydrogenation to γ-Valerolactone

Selective Conversion of Levulinic Acid to Gamma-Valerolactone over Ni-based Catalysts: Impacts of Catalyst Formulation on Sintering of Nickel

Highly efficient CuNi-ZrO2 nanocomposites for selective hydrogenation of levulinic acid to γ-valerolactone

Bimetallic NiCu Alloy Catalysts for Hydrogenation of Levulinic Acid

Ion-Exchange Synthesis of Surrounded CoNi@Al2O3 Catalyst for Levulinic Acid Hydrogenation to γ-Valerolactone under Mild Conditions

Cu/H–ZSM-5: A highly active and selective catalyst for the production of γ-valerolactone from biomass-derived levulinic acid

An Efficient and Reusable Bimetallic Ni3Fe NPs@C Catalyst for Selective Hydrogenation of Biomass-Derived Levulinic Acid to Γ-Valerolactone

Alkaline Modified Zr-loading on Nanosheet Zeolite Towards Production of γ-Valerolactone from Levulinic Acid Through Catalytic Transfer Hydrogenation