Abstract:Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions. Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions.

Ion-Exchange Synthesis of Surrounded CoNi@Al2O3 Catalyst for Levulinic Acid Hydrogenation to γ-Valerolactone under Mild Conditions

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Hydrogenation of Levulinic Acid over Nickel Catalysts Supported on Aluminum Oxide to Prepare Γ-Valerolactone

Low Loading of CoRe/TiO<sub>2</sub> for Efficient Hydrodeoxygenation of Levulinic Acid to -Valerolactone

Selective Production of gamma-Valerolactone and Valeric Acid in One-Pot Bifunctional Metal Catalysts

Catalytic Hydrogenation of Levulinic Acid to Gamma-Valerolactone over Ni/ZrO2

Selective Conversion of Levulinic Acid to Gamma-Valerolactone over Ni-based Catalysts: Impacts of Catalyst Formulation on Sintering of Nickel

In Situ Construction of a Co/ZnO@C Heterojunction Catalyst for Efficient Hydrogenation of Biomass Derivative under Mild Conditions

An Efficient and Reusable Bimetallic Ni3Fe NPs@C Catalyst for Selective Hydrogenation of Biomass-Derived Levulinic Acid to Γ-Valerolactone

Selective Production of γ-Valerolactone from Biomass-Derived Levulinic acid over Ni/CMK-3 catalyst

Highly efficient CuNi-ZrO2 nanocomposites for selective hydrogenation of levulinic acid to γ-valerolactone

Synthesis of Γ-Valerolactone from Ethyl Levulinate Hydrogenation and Ethyl 4-Hydroxypentanoate Lactonization over Supported Cu-Ni Bimetallic, Bifunctional Catalysts

Highly active and stable Co nanoparticles embedded in nitrogen-doped mesoporous carbon nanofibers for aqueous-phase levulinic acid hydrogenation

Solvent‐Free Efficient Hydrogenation of Levulinic Acid over Silicotungstic Acid Promoting the Activity of CuNiAl Catalysts: A Synergistic Effect

Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Mesoporous Silica-Supported Cu-Ni Composite Catalysts

Bimetallic NiCu Alloy Catalysts for Hydrogenation of Levulinic Acid

A durable Ni/La-Y catalyst for efficient hydrogenation of γ-valerolactone into pentanoic biofuels

Improved Catalytic Activity and Stability for Hydrogenation of Levulinic Acid by Ru/N-doped Hierarchically Porous Carbon

Hydrogen Spillover on Ni@Graphene Enables Robust and Efficient Catalytic Hydrogenation of Aqueous Levulinic Acid to Γ-Valerolactone

Hydrogenation of levulinic acid to γ-valerolactone in dioxane over mixed MgO–Al2O3 supported Ni catalyst

The Formation of γ-Valerolactone from Renewable Levulinic Acid over Ni-Cu Fly Ash Zeolite Catalysts