Abstract:Laser sources are extensively used in surface engineering technology and in materials processing. Their high energy density, excellent directionality and monochromaticity makes them ideal for a wealth of potential uses that require the concentration of a significant amount of energy in a small area. From the electrochemical point of view, one of the most interesting applications for lasers is Laser Assisted Electrodeposition (LAE). Indeed, the high energy density transferred by a laser can locally change the electrochemical state of a surface by inducing photo-electrochemical or thermal-electrochemical effects, triggering thus metal reduction. In addition, it is also possible to pattern the deposited metal layer by scanning the surface of the substrate with the laser, usually with spatial resolution in the range of few micrometers. From the applicative point of view, LAE can be exploited for the selective deposition of metal layers for both decorative and functional uses. LAE can be intended in two ways: the laser can be used to enhance a standard electrolytic deposition process [1, 2], increasing deposition rates by focusing the radiation on the cathode, or it can be used to trigger electrodeposition on freestanding metal surfaces in total absence of any external polarization [1]. The latter approach is the most interesting due to the reduced complexity of the setup required and is made possible by the localized variation of the rest potential induced in the zone of the substrate hit by the light [1]. As a consequence of this variation, metallic ions can be reduced in correspondence of the illuminated zone. The occurrence of this phenomenon, which allows metal deposition without any external power source, has been demonstrated for Cu [1, 3], Ni [3] and Au [4]. Despite the work carried out by many research groups, still many aspects of LAE in absence of external polarization remain poorly understood. The aim of the present work is to investigate the possibility to perform LAE with some significant metal-substrate couples. The deposition mechanism is rationalized considering the specific electrochemical properties of the metals involved. In addition to this fundamental characterization, the work also aims at evaluating the industrial applicability of LAE. To this extent, patterned layers of precious metals are deposited on metallic substrates for decorative purposes. Finally, LAE is applied here for the first time to the deposition of alloys. [1] J. C. Puippe et al., J. Electrochem. Soc. 128(12), 2539-2545 (1981) [2] Z. Zhang et al., MDPI Materials 13, 3560 (2020) [3] R. J. von Gutfeid et al., IBM J. Res. Develop. 26(2), 136-144 (1982) [4] Khan et al., NASF Surface Technology White Papers 84(3), 6-13 (2019)

Innovative Fabrication of Metal Alloy Structures via Laser‐Induced Forward Transfer on Flexible Substrates

Study of Negative Side Wall Surface Roughness by Picosecond Photonic Impact Microdeposition

Laser-Driven Micro Transfer Placement of Prefabricated Microstructures

High Reflectivity and Thermal Conductivity Ag–Cu Multi-Material Structures Fabricated via Laser Powder Bed Fusion: Formation Mechanisms, Interfacial Characteristics, and Molten Pool Behavior

Printing Functional 3d Microdevices by Laser-Induced Forward Transfer

Additive and Photochemical Manufacturing of Copper

Laser Assisted Electrodeposition of Metals and Alloys

Laser induced forward transfer of NiTi deposits for functionally graded SMA components

One-Step Non-Contact Additive LIFT Printing of Silver Interconnectors for Flexible Printed Circuits

High-Temperature Imprinting and Superhydrophobicity of Micro/Nano Surface Structures on Metals Using Molds Fabricated by Ultrafast Laser Ablation

Modification of Polymeric Surfaces with Ultrashort Laser Pulses for the Selective Deposition of Homogeneous Metallic Conductive Layers

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

Ejection Regimes in Picosecond Laser-Induced Forward Transfer of Metals

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

Effects on the distortion of Inconel 718 components along a hybrid laser-based additive manufacturing process chain using laser powder bed fusion and laser metal deposition

Microstructural Control of a Multi‐Phase PH Steel Printed with Laser Powder Bed Fusion

Intentional Oxidation and Laser Remelting of Highly Reflective Pure Cu for Its High‐Quality Additive Manufacturing

Printing via Laser-Induced Forward Transfer and the Future of Digital Manufacturing

A Manufacturability Evaluation of Complex Architectures by Laser Powder Bed Fusion Additive Manufacturing

Nanolayer Laser Absorber for Femtoliter Chemistry in Polymer Reactors

Investigation of In-Situ Low Copper Alloying of 316L Using the Powder Bed Fusion Process