Abstract:Acetylene (C2H2) is a flammable and explosive alkyne, which is usually used as a fault feature of oil-immersed transformers. When the concentration of dissolved C2H2 in the transformer oil exceeds 0.1 ppm, it is considered that the transformer has a discharge fault. Therefore, the development of a reliable measurement system that can detect trace amounts of C2H2 is of great significance in the field of industrial equipment failure detection. To this end, this paper built a high-sensitivity cantilever-enhanced photoacoustic spectrometer with a broadband infrared emitter and a detection limit of ∼0.078 ppm with the 1σ confidence level was obtained. Moreover, through the Allan variance analysis, a minimum detection limit of ∼0.008 ppm was obtained when the photoacoustic spectrometer’s sampling time is set to 80 s. Besides, by analyzing the source of the instrument’s background noise, it is found that the vibration noise caused by the mechanical chopper is a significant source of background noise in the photoacoustic signal. Therefore, the photoacoustic spectrometer’s sensitivity can be effectively improved by replacing the traditional mechanical chopper with an electronic chopper. Lastly, the sensitivity of the photoacoustic spectrometer under different optical power of the infrared emitter, the temperature and pressure conditions of the C2H2/N2 gas sample is evaluated. It turns out that as the optical power and gas sample pressure increase, the sensitivity of the photoacoustic spectrometer increases, while as the temperature of the gas sample increases, the sensitivity of the photoacoustic spectrometer decreases.

Interference characteristics of leaking SF6 on photoacoustic detection of dissolved C2H4 in transformer oil

Detection of SF6 gas decomposition component H2S based on fiber-optic photoacoustic sensing

Detection of SF 6 Decomposition Components under Partial Discharge by Photoacoustic Spectrometry and Its Temperature Characteristic

Study on Photoacoustic Spectroscopy Detection of CO in Gas Insulation Equipment

Development of an Online Detection Setup for Dissolved Gas in Transformer Insulating Oil

Highly sensitive photoacoustic multicomponent gas sensor for SF6 decomposition online monitoring

Detection of trace C2H2 in N2 buffer gas with cantilever-enhanced photoacoustic spectrometer

Multi-pass Differential Photoacoustic Sensor for Real-Time Measurement of SF6 Decomposition Component H2S at the ppb Level

Fiber-Optic Photoacoustic CO Sensor for Gas Insulation Equipment Monitoring Based on Cantilever Differential Lock-In Amplification and Optical Excitation Enhancement

Portable ppb-level acetylene photoacoustic sensor for transformer on-field measurement

Trace Acetylene Gas Detection Based on a Miniaturized Y-Sphere Coupled Photoacoustic Sensor

Detection of gaseous halocarbon refrigerants and extinguishing agent based on photoacoustic spectroscopy

Application of Gas Photoacoustic Spectroscopy Optical Detection Technology to SO2F2 Gas Concentration Detection

All-optical photoacoustic detection of SF 6 decomposition component SO 2 based on fiber-coupled UV-LED

Pressure-Compensated Fiber-Optic Photoacoustic Sensors for Trace SO 2 Analysis in Gas Insulation Equipment

Application of Photo-acoustic Spectroscopy Technology to Dissolved Gas Analysis of Oil-immersed Power Transformer

A High Sensitivity Optical Fiber Interferometer Sensor for Acoustic Emission Detection of Partial Discharge in Power Transformer

Dissolved gas monitoring probe without liquid-gas separation under strong electromagnetic interference

Gas Sensing Mechanism and Adsorption Properties of C2H4 and CO Molecules on the Ag3–HfSe2 Monolayer: A First-Principle Study

Online Detection of Hydrogen Fluoride under Corona Discharge in Gas-Insulated Switchgear Based on Photoacoustic Spectroscopy

In Situ Gas Filter Correlation: Photoacoustic CO Detection Method for Fire Warning