Abstract:This article introduces a hybrid 3-D frequency selective structure (FSS) that offers high stopband suppression and low insertion loss to mitigate pattern degradation resulting from the mutual coupling of co-aperture array antennas. Traditional 2-D FSSs exhibit good passband performance but lack cross-coupling between resonators, making it difficult to achieve strong stopband suppression at a lower frequency. In contrast, traditional 3-D FSSs provide strong stopband suppression, but the vertical structures pose challenges for impedance matching, leading to high passband loss and poor angular stability. The FSS proposed in this article combines the advantages of both 2-D and 3-D FSSs. It introduces transmission zeros by combining a vertical surface with a cross-shaped metal strip on the foundational 2-D passband FSS. This design significantly enhances the stopband suppression capability of the FSS at the frequencies of interest without compromising the low insertion loss performance in the passband. Simulation results indicate that the proposed 3-D FSS achieves a -10 dB stopband within the frequency range of 1.2 to 2.93 GHz, with a stopband suppression of -16 dB at 2.7 GHz. Furthermore, the average insertion loss within the passband frequency range of 3.3-3.8 GHz remains low, staying below 0.23 dB. The FSS's transmission response remains stable under oblique incidences ranging from 0 degrees to 60 degrees. The operating principle of the FSS is elucidated using an equivalent circuit model. A prototype FSS is fabricated and experimentally characterized for validation. The measured results align with the simulated ones, confirming the FSS's high stopband suppression, low insertion loss, and excellent angular stability, making it a viable solution for mitigating pattern degradation in co-aperture array antennas.

A Generalized Synthesis Technique for High-Order and Wideband 3-D Frequency-Selective Structures With Chebyshev Functions

Synthesis Design of Inductively-Coupled 3-D Bandpass Frequency-Selective Structures Based on Equivalent SOL-Extracted Circuit Model

Wideband Bandpass Frequency-Selective Structures on Stacked Slotline Resonators: Proposal and Synthetic Design

A Novel Dual-Band Frequency Selective Surface (FSS)

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Synthesis Design of Bandpass Frequency Selective Surface With Multiple Transmission Zeros Using Slotline Structures

Multi-characteristic Integrated Ultra-wideband Frequency Selective Rasorber

A Novel Frequency Selective Surface with Smaller Size and Wide Band

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

A Fifth-Order X-Band Frequency Selective Surface with High Selectivity and Angular Stability Based on 3-D Coupling Slot

A Hybrid 2-D–3-D Miniaturized Multiorder Wide Bandpass FSS

Design of wideband bandpass frequency selective surface based on the patch resonators and substrate integrated waveguide cavities

Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface

High Roll-Off Frequency Selective Surface With Quasi-Elliptic Bandpass Response

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A 3-D Wide Passband Frequency Selective Surface With Sharp Roll-Off Sidebands and Angular Stability

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity

High-Order Wideband Band-Pass Miniaturized Frequency-Selective Surface with Enhanced Equivalent Inductance

Band-Stop Frequency-Selective Surface (FSS) with Elliptic Response Designed by the Extracted Pole Technique

A Hybrid 3-D Frequency Selective Structure Featuring Enhanced Stopband Suppression and Reduced Insertion Loss

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface