Abstract:Objectives: Multilayer monolithic zirconia (M-Zr) crowns can be engineered to achieve gradational translucency and color intensity. However, this modification may compromise the mechanical strength, raising concerns regarding the ability of M-Zr crowns to withstand occlusal stresses. The effects of M-Zr crown thickness on translucency and ability to endure occlusal forces were investigated at different tooth positions (incisors, premolars, and molars). The objective was to determine the minimal thickness of M-Zr crowns used in tooth preparation to meet aesthetic and functional demands. Methods: M-Zr samples (Vita A1) with four thicknesses (0.5, 1.0, 1.5, and 2.0 mm) were prepared and subjected to translucency testing using a digital colorimeter by 3-third and 9-square division methods. Crown-shaped M-Zr samples with three thicknesses (1.0, 1.5, and 2.0 mm) and three tooth positions (incisor, premolar, and molar) were digitally designed, and 2.0 mm metal abutments were fabricated. The samples were bonded to the abutments; their fracture characteristics were evaluated using a universal testing machine, and their fracture surfaces examined using an optical microscope. Statistical analyses included the Shapiro-Wilk test, Pearson correlation, and one-way and two-way ANOVA with a post hoc Tukey HSD test (α = 0.05). Results: Color analysis results revealed a significant negative correlation between thickness and translucency (r < -0.96, P < 0.01), with the highest values in the incisal region. Cross-sectional profiles confirmed the uniform thickness and morphology of the digitally designed M-Zr crowns. The results of fracture strength analysis showed position-dependent variability, a strong positive correlation with thickness (r > 0.96, P < 0.01), and fracture strengths consistently exceeding 1200 N across all tooth positions. Fracture patterns indicated that thinner crowns at the incisors and molars were more prone to cracking, whereas those at the premolars demonstrated significantly higher strength (4872.51 N, P < 0.05), only with crack or even no fracture occurring at 2.0 mm. Conclusions: Thickness significantly influenced both the translucency and fracture strength of M-Zr, with the tooth position playing an additional role, albeit to a lesser extent. Although thinner crowns exhibited lower strength at each tooth position, even at a thickness of 1.0 mm, fracture strength exceeding 1200 N was maintained, surpassing the typical occlusal forces. Thus, it can be asserted that M-Zr crowns with a minimum thickness of 1.0 mm can meet both aesthetic and functional requirements.

Translucency of chairside monolithic zirconias using different sintering ovens: An in vitro investigation

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Effect of Machining Method and Margin Design on the Accuracy and Margin Quality of Monolithic Zirconia Crowns

Effects of thickness and polishing treatment on the translucency and opalescence of six dental CAD-CAM monolithic restorative materials: an in vitro study

TRANSLUCENCY EVALUATION OF ZIRCONIA LITHIUM SILICATE AND LITHIUM DISILICATE GLASS CERAMIC WITH DIFFERENT THICKNESSES PRE AND POST CEMENTATION

Optical Properties of Monolithic Zirconia Fabricated with Nanoparticle Jetting

Effect of sintering procedures on optical properties, chemical composition, and grain size of monolithic zirconia ceramic at different thicknesses after hydrothermal aging: An in vitro study

[Effect of veneering technologies on color and translucency of Y2O3 stabilized tetragonal zirconia polycrystals all-ceramic restorations].

EVALUATION OF BIAXIAL FLEXURAL STRENGTH AND TRANSLUCENCY OF MULTICHROMATIC TRANSLUCENT ZIRCONIA AND LITHIUM DISILICATE CERAMICS

Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods

Evaluation of the Translucency Properties for CAD/CAM Full Ceramic Crowns Fabricated From Glass Ceramics (E.max) or High Translucency Zirconia (Lava Plus): A Clinical Study

Fracture characteristics and translucency of multilayer monolithic zirconia crowns of various thicknesses

Effect of sintering cycle on the strength and translucency of multilayered zirconia

Comparison of the translucency parameters and bond strength of 5Y-ZP zirconia, 3-YTZP zirconia, and lithium disilicate

Effects of Surface Treatment and Shade on the Color, Translucency, and Surface Roughness of High-Translucency Self-Glazed Zirconia Materials

Effect Of Veneering Techniques On Color And Translucency Of Y-Tzp

Comparison of Optical Properties and Fracture Loads of Multilayer Monolithic Zirconia Crowns with Different Yttria Levels

Randomized clinical trial of zirconia laminate veneers sintered by using conventional versus speed process: 1-year follow-up

Comparative effects of glazing versus polishing on mechanical, optical, and surface properties of zirconia ceramics with different translucencies

Optical Characteristics of Monochrome and Multilayer Fully Stabilized Zirconia Upon Sintered Cooling Speed

Effect of High-Speed Sintering on the Optical Properties, Microstructure, and Phase Distribution of Multilayered Zirconia Stabilized with 5 mol% Yttria