Experimental Study on Geopolymerization of Lunar Soil Simulant under Dry Curing and Sealed Curing

Jinhui Gu,Qinyong Ma

DOI: https://doi.org/10.3390/ma17061413

IF: 3.4

2024-03-21

Materials

Abstract:The construction of lunar surface roads is conducive to improving the efficiency of lunar space transportation. The use of lunar in situ resources is the key to the construction of lunar bases. In order to explore the strength development of a simulated lunar soil geopolymer at lunar temperature, geopolymers with different sodium hydroxide (NaOH) contents were prepared by using simulated lunar regolith materials. The temperature of the high-temperature section of the moon was simulated as the curing condition, and the difference in compressive strength between dry curing and sealed curing was studied. The results show that the high-temperature range of lunar temperature from 52.7 °C to 76.3 °C was the suitable curing period for the geopolymers, and the maximum strength of 72 h was 6.31 MPa when the NaOH content was 8% in the sealed-curing mode. The 72 h strength had a maximum value of 6.87 MPa when the NaOH content was 12% under dry curing. Choosing a suitable solution can reduce the consumption of activators required for geopolymers to obtain unit strength, effectively reduce the quality of materials transported from the Earth for lunar infrastructure construction, and save transportation costs. The microscopic results show that the simulated lunar soil generated gel substances and needle-like crystals under the alkali excitation of NaOH, forming a cluster and network structure to improve the compressive strength of the geopolymer.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper attempts to address the issue of simulating the geopolymerization reaction and strength development of lunar regolith under dry curing and sealed curing conditions at lunar surface temperature conditions. Specifically, the main objectives of the study include:

1. **Investigate the effect of different concentrations of sodium hydroxide (NaOH) on the strength of simulated lunar regolith geopolymers**: By preparing simulated lunar regolith geopolymers with different NaOH contents, the study examines the strength variations under different curing conditions.

2. **Simulate the high-temperature environment of the lunar surface**: Select the high-temperature period of the lunar surface as the curing condition to study the effect of these conditions on the compressive strength of geopolymers.

3. **Compare the differences between dry curing and sealed curing conditions**: Through experiments, compare the compressive strength of simulated lunar regolith geopolymers under dry curing and sealed curing conditions, and analyze the impact of the dry curing environment on the performance of geopolymers.

4. **Optimize the curing temperature scheme and NaOH concentration**: Determine the optimal curing temperature scheme and NaOH concentration to improve the strength and efficiency of simulated lunar regolith geopolymers, thereby providing experimental evidence for the application of lunar road construction materials.

Through these studies, the paper aims to provide scientific support for the use of in-situ lunar resources for lunar infrastructure construction, reduce the cost of transporting materials from Earth, and improve the efficiency of lunar exploration and construction.