Abstract:The precise assessment of the kinetic properties of graphite is crucial for the design of the material and the development of electrochemical models for lithium-ion batteries. However, conventional evaluation methods using composite electrodes fall short in excluding the influence of its porous structure and evaluating the influence of particle shape on kinetic behavior. In this work, we elucidate the impact of non-spherical morphology on kinetic behavior of single artificial graphite particle, employing the single-particle microelectrode technique. Three single artificial graphite particles with different sizes are pre-cycled and exhibit outstanding rate capability, maintaining a maximum capacity retention of 78.1 % at 200 C. Further, exchange current density and diffusion coefficients are determined through Tafel plots and the potentiostatic intermittent titration technique (PITT), respectively. It is found that the particle with a higher exposure of edge planes present elevated exchange current density and diffusion coefficients. Considering that the graphite particles typically feature an ellipsoidal rather than spherical shape, we propose an approach based on an ellipsoidal diffusion model for extracting diffusion coefficients. This model takes into account the non-spherical morphology of graphite, addressing the limitations inherent in the geometric assumptions of previous methods. The average relative error between the diffusion coefficients derived from the ellipsoidal diffusion model and the previous method using spherical assumptions is 215%, indicating that accurately depicting the shape of ellipsoidal graphite particles in the model is crucial for obtaining correct estimates of kinetic parameters. This study offers direct experimental evidence of superior kinetic behavior of edge planes over basal planes. To leverage this characteristic, it is recommended to employ an out-of-plane aligned architecture for composite electrodes using novel techniques, e.g., 3D printing or magnetic alignment techniques.

Microfluidic Shape Analysis of Non‐spherical Graphite for Li‐Ion Batteries via Viscoelastic Particle Focusing (Small 45/2024)

Microfluidic Shape Analysis of Non-spherical Graphite for Li-Ion Batteries via Viscoelastic Particle Focusing

Elucidating the Impact of Non-Spherical Morphology on Kinetic Behavior of Graphite Using Single-Particle Microelectrode

Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode

Extensional rheology of anode slurries for li-ion batteries containing natural and synthetic graphite

Guiding the Design of Heterogeneous Electrode Microstructures for Li‐Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning

Relationship between particle shape and fast-charging capability of a dry-processed graphite electrode in lithium-ion batteries

Structural Engineering in Graphite‐Based Metal‐Ion Batteries

Lithium Ion Batteries: Atomic‐Distributed Coordination State of Metal‐Phenolic Compounds Enabled Low Temperature Graphitization for High‐Performance Multioriented Graphite Anode (Small 33/2020)

Achieving high volumetric energy density in graphite anodes through polymer coating with improved electrolyte impregnation

Multiple scales homogenisation of a porous viscoelastic material with rigid inclusions: application to lithium-ion battery electrodes

Optimization of LiB Electrode with Bi-Diameter Active Particles Using a Microstructure-Resolved Model

Correlating Nanoscale Structure with Electrochemical Property of Solid Electrolyte Interphases in Solid-State Battery Electrodes

Interfacial kinetics and low-temperature behavior of spheroidized natural graphite particles as anode for Li-ion batteries

Correlation between graphite morphology and interparticle space affecting rate performance in Li-ion battery anodes

Benchmarking the Effect of Particle Size on Silicon Anode Materials for Lithium‐Ion Batteries (Small 42/2023)

Effect of natural graphite particle and its distribution on the performance of Li-ion battery

A numerical study of mechanical degradation of Carbon-Coated Graphite Active Particles in Li-ion battery anodes

Electrochemical Performance of Dry Processed Graphite Electrode with PTFE Binder for Lithium-Ion Batteries

Calendering-Compatible Macroporous Architecture for Silicon-Graphite Composite toward High-Energy Lithium-Ion Batteries

Additive-Driven Nanoscale Architecture of Solid Electrolyte Interphase Revealed by Cryogenic Transmission Electron Microscopy