Abstract:Lithium metal batteries are considered to be a leading candidate for next generation batteries due to their higher energy density and potential for safer operation when combined with solid-state electrolyte materials. However, they are still facing different challenges. A key challenge of lithium metal batteries is the volume expansion over cycling due to the non-uniform deposition of lithium on the anode leading to lithium dendrite formation compromising the battery safety, and poor lifetime. Herein, we report the use of porous Lithium Lanthanum Zirconium Oxide (LLZO) anode structures, in which lithium from the cathode is deposited into the pores during initial charging. The goal of this study is to study postmortem the lithium deposition in the porous host after different cycling conditions to measure the 7 Li and 6 Li isotopes depth profile by nuclear reaction analysis (NRA), namely, Proton Induced γ-Ray Emission (PIGE) and by Deuteron Induced Particle Emission (DIPE), respectively. The advantages of using NRA are that it gives an absolute measurement of Lithium without sample reliant calibration, it is a nondestructive technique, highly selective for specific light nuclides such as Lithium, and it is not affected by coordination effect. We demonstrate two different fabrication methods of porous LLZO structures, namely, electrospinning and electrospraying. Then, the fabricated LLZO structures are tested electrochemically using a half cell configuration to examine plating/stripping behavior as a function of current density and to track the overpotential evolution over cycling. Finally, the cycled anodes are investigated using NRA in particular Li concentration inside porous anode, at separator/anode interface and anode/current collector interface. Characterizing the concentration gradient of Li species within the porous and at the various interfaces can help define the current density limitations of solid-state Li metal batteries and identify Li loss failure modes so that cell lifetime can be improved.

Delocalized Lithium Ion Flux by Solid-State Electrolyte Composites Coupled with 3D Porous Nanostructures for Highly Stable Lithium Metal Batteries

Interfacial "Single‐Atom‐in‐Defects" Catalysts Accelerating Li+ Desolvation Kinetics for Long‐lifespan Lithium Metal Batteries

3D Porous Cu-Composites for Stable Li-Metal Battery Anodes

In Situ Formation of an Artificial Lithium Oxalate-Rich Solid Electrolyte Interphase on 3D Ni Host for Highly Stable Lithium Metal Batteries

Stabilizing Li Growth Using Li/LLZO Composites for High‐Performance Li‐Metal‐Based Batteries

Cathode Structural Design Enabling Interconnected Ionic/electronic Transport Channels for High-Performance Solid-State Lithium Batteries

High-Performance Composite Lithium Anodes Enabled by Electronic/Ionic Dual-Conductive Paths for Solid-State Li Metal Batteries

Bifunctional composite separator with a solid-state-battery strategy for dendrite-free lithium metal batteries

Early Lithium Plating Behavior in Confined Nanospace of 3D Lithiophilic Carbon Matrix for Stable Solid-State Lithium Metal Batteries.

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile

3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries

A Novel Metal-Organic-Framework-Based Composite Solid Electrolyte for Lithium Metal Batteries

Preferential Lithium Plating in the Interfacial Void Region in All-Solid-State Batteries via Pressure Gradient-Driven Lithium-Ion Flux

Structurally stabilized lithium-metal anode via surface chemistry engineering

Effective Electron–ion Percolation Network Enabled by in Situ Lithiation for Dendrite-Free Li Metal Battery

Evaluation of Porous Lithium Lanthanum Zirconium Oxide (LLZO) Anode Host Structures for Li-Metal Batteries

Strategies in Structure and Electrolyte Design for High‐Performance Lithium Metal Batteries

Electrical Conductivity Gradient Based on Heterofibrous Scaffolds for Stable Lithium‐Metal Batteries

Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes

Stabilizing Lithium Metal Batteries by Synergistic Effect of High Ionic Transfer Separator and Lithium-Boron Composite Material Anode

Transforming from Planar to Three-Dimensional Lithium with Flowable Interphase for Solid Lithium Metal Batteries.