Abstract:The purpose of this paper is to examine the microstructural evolution and mechanical properties of Ni/Ti laminated composite produced by a cross-accumulative roll bonding (CARB) method. The SEM images showed that no void and delamination were observed which indicates that the layers were strongly bonded together. In addition to the thickness reduction and increased number of interfaces, plastic instabilities took place with an increase in CARB passes; the wavy-like interfaces appeared as a result of the necking and shear bands formation. However, due to the effect of uniform rolling pressure and rotation of rolling direction during the CARB process, all layers remained continuous in all CARB passes. The most marked observation coming from EBSD analyses was the formation of fine grains surrounded by a high fraction of high-angle grain boundaries (HAGBs). Based on the microtexture analyses on Ti and Ni layers, it was found that by increasing the rolling passes, a crystallographic texture formed in Ti layers gradually changes from the basic {0001}<112 ̅0 > system into the system dominated by {0001}<101 ̅0 > prismatic-like orientations. In the case of the crystallographic texture formed in Ni layers, there was a significant increase in the intensity of the Q{013}<231>; P{011}<122 > and Goss {011}<100>, indicating the formation of shear strain-assisted type of texture. Furthermore, with an increase in the CARB passes, the mechanical properties improved due to strong interfaces and grain refinement. The maximum values of the yield strength, tensile strength, and elongation reached 842 MPa, 936 MPa, and 7.1% respectively, in the final CARB pass. In addition, ductile fracture mainly occurred on fracture surfaces of Ti and Ni layers even though by increasing passes, cleavage facets appeared due to strain hardening.Graphic Abstract

Strengthening the bonding interfaces of hybrid titanium carbon laminates by bionic micro texture and carbon nanotube pinning

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Enhanced interfacial adhesion of CF/PEEK-titanium hybrid laminates via introducing micro-nano layers with multi-walled carbon nanotube networks

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Enhanced the bonding reliability of titanium alloy and CFRTP via interfacial multiple modification: Synergy of physical interlocking and chemical interaction

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Interfacial enhancement of CFRP/titanium alloy bonding joint by constructing a 3D interconnected CNTs network

Growing carbon nanotubes in-situ via chemical vapor deposition and resin pre-coating treatment on anodized Ti-6Al-4V titanium substrates for stronger adhesive bonding with carbon fiber composites

The Effects of Combined Treatments of Laser Engraving, Plasma Spraying and Resin Pre-Coating on Improving the Bonding Strength of Titanium Alloy and Carbon Fiber-Reinforced Polymer

Experimental and first-principles study on TiB/TiC interface in hybrid (TiB+TiC)/Ti6Al4V composite

Enhanced interfacial joining strength of laser wobble joined 6061-T6 Al alloy/CFRTP joint via interfacial bionic textures pre-construction

Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing

Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6Al4V

A nanomodified-ultrasonic method to improve the shear strength of adhesively bonded composite joints

Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology

Microstructure, Texture and Tensile Properties of Nickel/Titanium Laminated Composites Produced by Cross Accumulative Roll Bonding Process

Enhancement of through-thickness thermal conductivity in adhesively bonded joints using aligned carbon nanotubes

Effects of laser hybrid interfacial pretreatment on enhancing the carbon fiber reinforced thermosetting composites and TC4 alloy heterogeneous joint

Significant increase in mechanical performance of the C/C-Mo joint by controlling the interfacial defects

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Comparative Study of Resin and Silane Coupling Agents Coating Treatments on Bonding Strength Improvement of Titanium and Carbon Fiber Composites