Abstract:The efficiency of hydrogen gas generation via electrochemical water splitting has been mostly limited by the availability of electrocatalyst materials that require lower overpotentials during the redox reaction. Noble metals have been used extensively as electrocatalysts due to their high activity and low overpotentials. However, the use of single noble metal electrocatalyst is limited due to atomic aggregation caused by its inherent high surface energy, which results in poor structural stability, and, hence, poor electrocatalytic performance and long-term stability. In addition, using noble metals as electrocatalysts also causes the cost to be unnecessarily high. These limitations in noble metal electrocatalysts could be enhanced by combining two noble metals in a core-shell structure (e.g., Rh@Ir) as a thin film over a base substrate. This could significantly enhance electrocatalytic activity due to the following: (1) the modification of the electronic structure, which increases electrical conductivity; (2) the optimization of the adsorption energy; and (3) the introduction of new active sites in the core-shell noble metal structure. The current state-of-the-art employs physical vapor deposition (PVD) or other deposition techniques to fabricate core-shell noble metals on flat 2D substrates. This method does not allow 3D substrates with high surface areas to be used. In the present work, atomic layer deposition (ALD) was used to fabricate nanoparticle thin films of Rh@Ir and Rh@Pt in a core-shell structure on glassy carbon electrodes. ALD enables the fabrication of nanoparticle thin film on three-dimensional substrates (a 2D functional film on a 3D substrate), resulting in a significantly increased surface area for a catalytic reaction to take place; hence, improving the performance of electrocatalysis. The Rh@Pt (with an overpotential of 139 mV and a Tafel slope of 84.8 mV/dec) and Rh@Ir (with an overpotential of 169 mV and a Tafel slope of 112 mV/dec) core-shell electrocatalyst exhibited a better electrocatalytic performances compared to the single metal Rh electrocatalyst (with an overpotential of 300 mV and a Tafel slope of 190 mV/dec). These represented a 54% and a 44% improvement in performance, respectively, illustrating the advantages of core-shell thin film nanostructures in enhancing the catalytic performance of an electrocatalyst. Both electrocatalysts also exhibited good long-term stability in the harsh acidic electrolyte conditions when subjected to chronopotentiometry studies.

Ultrathin Rh Nanosheets with Rich Grain Boundaries for Efficient Hydrogen Oxidation Electrocatalysis

Ultrathin Rhodium Oxide Nanosheet Nanoassemblies: Synthesis, Morphological Stability, and Electrocatalytic Application

Atomically Isolated Rh Sites Within Highly Branched Rh2 Sb Nanostructures Enhance Bifunctional Hydrogen Electrocatalysis.

Polyallylamine-Rh Nanosheet Nanoassemblies−carbon Nanotubes Organic-Inorganic Nanohybrids: A Electrocatalyst Superior to Pt for the Hydrogen Evolution Reaction

Host-Guest Ensemble Effect on Dual-Pt Atom-on-rh Nanosheets Enables High-Efficiency and Anti-CO Alkaline Hydrogen Oxidation

Rh nanoparticles supported on ultrathin carbon nanosheets for high-performance oxygen reduction reaction and catalytic hydrogenation.

Ultrasmall Rh Nanoparticles Decorated on Carbon Nanotubes with Encapsulated Ni Nanoparticles As Excellent and Ph-Universal Electrocatalysts for Hydrogen Evolution Reaction

Spatially Localized Fabrication of Uniform Rh Nanoclusters on Nanosheet-Assembled Hierarchical Carbon Architectures As Excellent Electrocatalysts for Boosting Alkaline Hydrogen Evolution

Facile Strategy to Prepare Rh Nanosheet-Supported PtRh Nanoparticles with Synergistically Enhanced Catalysis in Oxidation

Synergistic Modulation of Multiple Sites Boosts Anti‐Poisoning Hydrogen Electrooxidation Reaction with Ultrasmall (Pt0.9Rh0.1)3V Ternary Intermetallic Nanoparticles

Hydrothermal Synthesis and Catalytic Application of Ultrathin Rhodium Nanosheet Nanoassemblies

High Quality Synthesis of Rh Nanocubes and Their Application in Hydrazine Hydrate Oxidation Assisted Water Splitting

Nano-Sized PtRu/C Electrocatalyst With Separated Phases and High Dispersion Improves Electrochemical Performance of Hydrogen Oxidation Reaction

Boron Nanosheet-Supported Rh Catalysts for Hydrogen Evolution: A New Territory for the Strong Metal-Support Interaction Effect

Development of Core-Shell Rh@Pt and Rh@Ir Nanoparticle Thin Film Using Atomic Layer Deposition for HER Electrocatalysis Applications

One-pot Aqueous Synthesis of Two-Dimensional Porous Bimetallic PtPd Alloyed Nanosheets As Highly Active and Durable Electrocatalyst for Boosting Oxygen Reduction and Hydrogen Evolution

Facile Construction of 3D Hyperbranched PtRh Nanoassemblies: A Bifunctional Electrocatalyst for Hydrogen Evolution and Polyhydric Alcohol Oxidation Reactions

Rhodium Phosphide Ultrathin Nanosheets for Hydrazine Oxidation Boosted Electrochemical Water Splitting

Surface Engineering of Rh Catalysts with N/S-Codoped Carbon Nanosheets Toward High-Performance Hydrogen Evolution from Seawater

Embedding RhPx in N, P Co‐Doped Carbon Nanoshells Through Synergetic Phosphorization and Pyrolysis for Efficient Hydrogen Evolution

Efficient Bifunctional Polyalcohol Oxidation and Oxygen Reduction Electrocatalysts Enabled by Ultrathin PtPdM (M = Ni, Fe, Co) Nanosheets