Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A comparison of the positional effect of difluorination and the synergistic effect of siloxane-terminated side chains on benzodithiophene-based conjugated polymers for efficient photovoltaic application

Revealing the Position Effect of an Alkylthio Side Chain in Phenyl-Substituted Benzodithiophene-Based Donor Polymers on the Photovoltaic Performance of Non-Fullerene Organic Solar Cells

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

The synergistic effect of fluorine atom and alkyl chain positions in enhancing organic photovoltaic open-circuit voltage and morphology miscibility

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Influence of Difluoro Regio-Substitution Variations of Donor Polymers on the Non-Fullerene Solar Cell Performance

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

Effect of multiple electron-withdrawing substituents on photovoltaic properties of quinoxaline-based polymers

Elucidating fluorination effect on benzodithiophene-based donor material in organic solar cells

Perfluoroalkyl-Substituted Conjugated Polymers As Electron Acceptors for All-Polymer Solar Cells: the Effect of Diiodoperfluoroalkane Additives

Effects of chalcogenophene π-bridges on benzodifuran-based polymers for high-performance organic solar cells

Quinoxaline based A-A Type Polymer Donors for Non-Fullerene Polymer Solar Cells

Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells

Precise fluorination of polymeric donors towards efficient non-fullerene organic solar cells with balanced open circuit voltage, short circuit current and fill factor

Rational Design of Small Molecular Donor for Solution‐Processed Organic Photovoltaics with 8.1% Efficiency and High Fill Factor Via Multiple Fluorine Substituents and Thiophene Bridge

Density functional theory study of donor–acceptor conjugated polymers with substituent effect

Enhanced Charge Transfer, Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination

Achieving small non-radiative energy loss through synergically non-fullerene electron acceptor selection and side chain engineering in benzo[1,2- b :4,5- b ′]difuran polymer-based organic solar cells

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Nonfullerene Acceptors with Quinoxaline as the Core.

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

The steric effect of benzodifuran based polymers via alkyl side chain manipulation: a simple approach for enhancing the photovoltaic performance