Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The synergistic effect of fluorine atom and alkyl chain positions in enhancing organic photovoltaic open-circuit voltage and morphology miscibility

Fluorination of Terminal Groups Promoting Electron Transfer in Small Molecular Acceptors of Bulk Heterojunction Films

Influence of alkyl chain fluorination proportion on the photovoltaic performance of non-fullerene acceptors

A comparison of the positional effect of difluorination and the synergistic effect of siloxane-terminated side chains on benzodithiophene-based conjugated polymers for efficient photovoltaic application

Precise fluorination of polymeric donors towards efficient non-fullerene organic solar cells with balanced open circuit voltage, short circuit current and fill factor

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control

Over 19% Efficiency Organic Solar cells Enabled by Manipulating the Intermolecular Interactions through Side Chain Fluorine Functionalization

Asymmetric Non-Fullerene Acceptors with Branched Alkyl-Chains for Efficient Organic Solar Cells with High Open-Circuit Voltage

Designing High-Performance Wide Bandgap Polymer Donors by the Synergistic Effect of Introducing Carboxylate and Fluoro Substituents

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Synergistic direct and indirect central unit fluoridation of non-fullerene acceptor enables high-efficiency organic solar cells

Effect of fluorine on the photovoltaic properties of 2,1,3-benzothiadiazole-based alternating conjugated polymers by changing the position and number of fluorine atoms

Fluorination of a Polymer Donor Through the Trifluoromethyl Group for High-Performance Polymer Solar Cells

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Nonfullerene Acceptors with Quinoxaline as the Core.

Simple oxime functionalized fluorene polymers for organic solar cells

The Impact of Fluorination on Both Donor Polymer and Non-Fullerene Acceptor: the More Fluorine, the Merrier

Manipulating the intermolecular stacking of polymeric donors for efficient organic solar cells

Effect of fluorine atoms on optoelectronic, aggregation and dielectric constants of 2,1,3-benzothiadiazole-based alternating conjugated polymers

Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells

Molecular tailoring of trifluoromethyl-substituted conjugated polymers for efficient organic solar cells