Abstract:Deformation-induced martensite transformation from metastable retained austenite is one of the most efficient strain-hardening mechanisms contributing to the enhancement of strength-ductility synergy in advanced high-strength steels. However, the hard transformation product (often -martensite) and the H redistribution associated with phase transformation essentially decrease materials' resistance to hydrogen embrittlement. To solve this fundamental conflict, we introduce a new microstructure architecting strategy based on an accurately design of core–shell compositional distribution inside the austenite phase. We employed this approach in a typical medium Mn steel (8 wt.% Mn) with an ultrafine grained austenite-ferrite microstructure. We produced a high Mn content (15–16 wt.%) in the austenite shell region and a low Mn content (~ 12 wt.%) in the core region, through a thermodynamics-guided two-step austenite reversion treatment. During room-temperature deformation, the austenite core transforms continuously starting from a low strain, providing a high and persistent strain-hardening rate. The transformation of Mn-rich austenite shell, on the other hand, occurs only at the latest regime of the deformation, thus effectively inhibiting the nucleation of H-induced cracks at ferrite/deformation-induced martensite interfaces as well as suppressing their growth and percolation. This step-wise transformation, tailored directly targeted to protect the hydrogen-sensitive microstructure defects (interfaces), results in a significantly enhanced hydrogen embrittlement resistance without sacrificing the mechanical performance in hydrogen-free condition. The design of compositional core–shell structure is expected to be applicable to, at least, other multiphase advanced high-strength steels containing metastable austenite.

Formation of core-shell austenite as promoted by alloying solutes in hot-rolled medium Mn steel

Stabilizing austenite via intercritical Mn partitioning in a medium Mn steel

Mechanistic role of Mn heterogeneity in austenite decomposition and stabilization in a commercial quenching and partitioning steel

Stabilizing Austenite Via a Core-Shell Structure in the Medium Mn Steels

Enhancing the Hydrogen Embrittlement Resistance of Medium Mn Steels by Designing Metastable Austenite with a Compositional Core–shell Structure

Engineering Heterogeneous Multiphase Microstructure by Austenite Reverted Transformation Coupled with Ferrite Transformation

Kinetic Transitions and Mn Partitioning During Austenite Growth from a Mixture of Partitioned Cementite and Ferrite: Role of Heating Rate

New observations of the twinning effect and austenite stability in intercritical quenched and tempered steel with high strength

Microstructure and mechanical properties of a novel medium Mn steel with Cr and Mo microalloying

Tailoring the metastable reversed austenite from metastable Mn-rich carbides

Enhancing strength–ductility synergy in medium Mn steel with hetero-structured austenite developed by two-stage cyclic thermomechanical treatment and flash annealing

Ensuring Combination of Strength, Ductility and Toughness in Medium-Manganese Steel Through Optimization of Nano-Scale Metastable Austenite

Tailoring hetero-grained austenite via a cyclic thermomechanical process for achieving ultrahigh strength-ductility in medium-Mn steel

Heterostructure mediated high strength and large ductility in novel medium-Mn steels with low Mn content

Ultra-Fine Heterogeneous Microstructure Enables High Strength-Ductility in a Cold-Rolled Medium Mn Steel

High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing

Heterogeneous Multiphase Microstructure Formation through Partial Recrystallization of a Warm-Deformed Medium Mn Steel during High-Temperature Partitioning

Insights into the High Magnetic Field-Induced Austenite Formation in Medium Manganese Steel

Towards Strength-Ductility Synergy in a Medium Mn Steel Through Developing Heterogeneous Dual-Morphology Microstructure

An Extraordinary Reversed Austenite Transformation Behavior in a Cu-Rich Medium Manganese Steel

Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability