Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Numerical and experimental investigations on NANO-SIO2 jet polishing efficiency by different nozzle structures

Modeling and experiment on elastic region low defect jet polishing for fused quartz

Numerical Simulation of the Nanoparticle-Surface Collision in a Liquid Jet and Its Effects on Material Removal

The research of polishing nozzle quality based on discrete element method

An Experimental Study of the Nanoparticle Colloid Hydrodynamic Cavitation Jet Polishing Performance under Different Nozzle Designs

Investigate on Material Removal of 3C-Sic Crystals in Nano-Polishing Via Molecular Dynamics

Polishing Of Ultra Smooth Surface With Nanoparticle Colloid Jet

Modeling and experiment on elastic material removal in nanoparticle jet polishing

Figuring of an ultra-smooth surface in nanoparticle colloid jet machining

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Research on Material Removal Characteristics of Nanoparticle Colloid Jet Machining

Numerical and experimental study on cavitation enhancement of ultrasonic coupled abrasive jet polishing

Research on Abrasive Water Jet Polishing of Silicon Carbide Based on Fluid Self-Excited Oscillation Pulse Characteristics

Numerical and Experimental Investigation of Morphological Modification on Fused Silica Using CO2 Laser Ablation

Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing

Numerical and Experimental Study on Ultrasonic Vibration-Assisted Micro-Channelling of Glasses Using an Abrasive Slurry Jet

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Numerical Simulation of Surface Structures in Single and Multi-Track Laser Polishing of Ni P Alloy

The Influence of Impact Angle on Material Removal in Fluid Jet Polishing

Numerical Simulation Analysis of High-precision Dispensing Needles for Solid-liquid Two-phase Grinding