Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

The research of polishing nozzle quality based on discrete element method

Preliminary Study of Disc Hydrodynamic Polishing

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Numerical Simulation Analysis of High-precision Dispensing Needles for Solid-liquid Two-phase Grinding

Effect of the size of discrete phase abrasive particles on the abrasive flow polishing quality of common rail pipe

Technological parameter optimization and quality effects on solid-liquid phase abrasive flow polishing

Numerical and experimental investigations on NANO-SIO2 jet polishing efficiency by different nozzle structures

Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology

Effectiveness analysis of abrasive flow polishing S-shaped elbow with side holes based on large eddy simulation

Numerical research on multi-particle movements and nozzle wear involved in abrasive waterjet machining

Nozzle Wear in Abrasive Water Jet Based on Numerical Simulation

Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method

Quality Analysis of T-tube with Solid-Liquid Two-Phase Abrasive Flow Polished

Experimental Investigations into Roughness Finished by Abrasive Jet with Grinding Wheel As Restraint

Theoretical and Numerical Analysis on Finishing Mechanism by Rheological Properties and Flow Behaviors of Abrasive Media in Micro-Porous Structures

Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing

Modeling and experiment on elastic material removal in nanoparticle jet polishing

The Polishing of Inner Wall on Medical Device Hole by Shear Thickening Abrasive Flow

The Effect Of Process Parameters On Surface Roughness In Abrasive Jet Finishing With Grinding Wheel As Restraint

Numerical and experimental investigation on the material removal profile during polishing of inner surfaces using an abrasive rotating jet