Abstract:Alkaline sodium hydroxide/sodium silicate-activating high-purity metakaolin geopolymerization is described in terms of metakaolin deconstruction in tetrahedral hydrate silicate [O[Si(OH)3]]− and aluminate [Al(OH)4]− ionic precursors followed by their reassembling in linear and branched sialates monomers that randomly copolymerize into an irregular crosslinked aluminosilicate network. The novelty of the approach resides in the concurrent thermo-calorimetric (differential scanning calorimetry, DSC) and rheological (dynamic mechanical analysis, DMA) characterizations of the liquid slurry during the transformation into a gel and a structural glassy solid. Tests were run either in temperature scan (1 °C/min) or isothermal (20 °C, 30 °C, 40 °C) cure conditions. A Gaussian functions deconvolution method has been applied to the DSC multi-peak thermograms to separate the kinetic contributions of the oligomer's concurrent reactions. DSC thermograms of all tested materials are well-fitted by a combination of three overlapping Gaussian curves that are associated with the initial linear low-molecular-weight (Mw) oligomers (P1) formation, oligomers branching into alumina-rich and silica-rich gels (P2), and inter- and intra-molecular crosslinking (P3). The loss factor has been used to define viscoelastic behavioral zones for each DMA rheo-thermogram operated in the same DSC thermal conditions. Macromolecular evolution and viscoelastic properties have been obtained by pairing the deconvoluted DSC thermograms with the viscoelastic behavioral zones of the DMA rheo-thermograms. Two main chemorheological behaviors have been identified relative to pre- and post-gelation separation of the viscoelastic liquid from the viscoelastic solid. Each comprises three behavioral zones, accounting for the concurrently occurring linear and branching oligomerization, aluminate-rich and silica-rich gel nucleations, crosslinking, and vitrification. A "rubbery plateau" in the loss factor path, observed for all the testing conditions, identifies a large behavioral transition zone dividing the incipient gelling liquid slurry from the material hard setting and vitrification.

Visualising Geopolymerisation Processes Using Scanning X-Ray Diffraction and Fluorescence Microscopy

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans

Early-stage Geopolymerization Revealed by 27al and 29si Nuclear Magnetic Resonance Spectroscopy Based on Vacuum Dehydration

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

Exploring the chemistry of metakaolin-based geopolymers

Reaction mechanism, kinetics and high temperature transformations of geopolymers

Microstructure Evolution Mechanism of Geopolymers with Exposure to High-Temperature Environment

The Influence of Particle Size and Calcium Content on Performance Characteristics of Metakaolin- and Fly-Ash-Based Geopolymer Gels

Investigation of Setting Time and Microstructural and Mechanical Properties of MK/GGBFS-Blended Geopolymer Pastes

Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers

Synthesis, thermal, and mechanical characterisation of metakaolin-based geopolymers coloured with grape marc extract

Impact of NH4OH treatment on the ion exchange and pore characteristics of a metakaolin-based geopolymer

Synthesis of nano-alumina and their effect on structure, mechanical and thermal properties of geopolymer

Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer

Investigation on the Microstructure and Mechanism of Geopolymer with Different Proportion of Quartz and K-feldspar

Setting Behavior and Phase Evolution on Heat Treatment of Metakaolin-Based Geopolymers Containing Calcium Hydroxide

Effect of Na + alkaline activation on the geopolymerization of a pure metakaolin at room temperature

Mechanistic understanding of geopolymerization at the initial stage: Ab initio molecular dynamics simulations

A Study of the Formation Process of the Geopolymer Gel