Abstract:Geopolymers are prepared by alkali solution-activated natural minerals or industrial waste materials, which have been widely used as new sustainable building and construction materials for their excellent thermal and mechanical properties. The thermal and mechanical properties of geopolymers at high temperature have attracted great attention from many researchers. However, there are few systematic works concerning these two issues. Therefore, this work reviewed the thermal and mechanical behaviors of geopolymers at high temperature. Firstly, the thermal properties of geopolymers in terms of mass loss, thermal expansion, and thermal conductivity after high temperature were explained. Secondly, the mechanical properties of residual compressive strength and stress-strain relationship of fly ash geopolymers and metakaolin geopolymers after high temperature were analyzed. Finally, the microstructure and mineralogical characteristics of geopolymers upon heating were interpreted according to the changes of microstructures and compositions. The results show that the thermal properties of geopolymers are superior to cement concrete. The geopolymers possess few mass loss and a low expansion ratio and thermal conductivity at high temperature. The thermal and mechanical properties of the geopolymers are usually closely related to the raw materials and the constituents of the geopolymers. Preparation and testing conditions can affect the mechanical properties of the geopolymers. The stress-strain curves of geopolymer are changed by the composition of geopolymers and the high temperature. The silicon-type fillers not only improve the thermal expansion of the geopolymers but also enhance mechanical properties of the geopolymers. But, they do not contribute to reducing the thermal conductivity. the different raw materials, aluminosilicate precursor and reinforcement materials, result in different geopolymer damage during the heating. However, phase transitions can occur during the process of heating regardless of the raw materials. The additional performance enhancements can be achieved by optimizing the paste formulation, adjusting the inner structure, changing the alkali type, and incorporating reinforcements.

Reaction mechanism, kinetics and high temperature transformations of geopolymers

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Modeling the Polymerization Process for Geopolymer Synthesis Through Reactive Molecular Dynamics Simulations

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans

Mechanistic understanding of geopolymerization at the initial stage: Ab initio molecular dynamics simulations

Nano-scale study on molecular structure, thermal stability, and mechanical properties of geopolymer

Exploring the chemistry of metakaolin-based geopolymers

Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review

Preparation of Al2O3-2SiO2/geopolymer Powder by Hydrolytic Sol-Gel Method and Its Activity Characterization and Research on the Reaction Mechanism

Microstructure Evolution Mechanism of Geopolymers with Exposure to High-Temperature Environment

Phase transition and thermal stability of ceramics from Na‐based geopolymers

Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions

Early-stage Geopolymerization Revealed by 27al and 29si Nuclear Magnetic Resonance Spectroscopy Based on Vacuum Dehydration

HYDROLYSIS KINETICS OF ALUMINATES IN GEOPOLYMERS SYNTHESIS

A Study of the Formation Process of the Geopolymer Gel

Mechanism of Polymerization During the Solidification of Flyash-based Geopolymers

Thermal evolution and crystallization kinetics of potassium-based geopolymer

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Geopolymers made using organic bases. Part I: Synthesis and atomic structure