Abstract:Alkaline sodium hydroxide/sodium silicate-activating high-purity metakaolin geopolymerization is described in terms of metakaolin deconstruction in tetrahedral hydrate silicate [O[Si(OH)3]]− and aluminate [Al(OH)4]− ionic precursors followed by their reassembling in linear and branched sialates monomers that randomly copolymerize into an irregular crosslinked aluminosilicate network. The novelty of the approach resides in the concurrent thermo-calorimetric (differential scanning calorimetry, DSC) and rheological (dynamic mechanical analysis, DMA) characterizations of the liquid slurry during the transformation into a gel and a structural glassy solid. Tests were run either in temperature scan (1 °C/min) or isothermal (20 °C, 30 °C, 40 °C) cure conditions. A Gaussian functions deconvolution method has been applied to the DSC multi-peak thermograms to separate the kinetic contributions of the oligomer's concurrent reactions. DSC thermograms of all tested materials are well-fitted by a combination of three overlapping Gaussian curves that are associated with the initial linear low-molecular-weight (Mw) oligomers (P1) formation, oligomers branching into alumina-rich and silica-rich gels (P2), and inter- and intra-molecular crosslinking (P3). The loss factor has been used to define viscoelastic behavioral zones for each DMA rheo-thermogram operated in the same DSC thermal conditions. Macromolecular evolution and viscoelastic properties have been obtained by pairing the deconvoluted DSC thermograms with the viscoelastic behavioral zones of the DMA rheo-thermograms. Two main chemorheological behaviors have been identified relative to pre- and post-gelation separation of the viscoelastic liquid from the viscoelastic solid. Each comprises three behavioral zones, accounting for the concurrently occurring linear and branching oligomerization, aluminate-rich and silica-rich gel nucleations, crosslinking, and vitrification. A "rubbery plateau" in the loss factor path, observed for all the testing conditions, identifies a large behavioral transition zone dividing the incipient gelling liquid slurry from the material hard setting and vitrification.

Early-stage Geopolymerization Revealed by 27al and 29si Nuclear Magnetic Resonance Spectroscopy Based on Vacuum Dehydration

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Nano-scale study on molecular structure, thermal stability, and mechanical properties of geopolymer

Modeling the Polymerization Process for Geopolymer Synthesis Through Reactive Molecular Dynamics Simulations

Visualising Geopolymerisation Processes Using Scanning X-Ray Diffraction and Fluorescence Microscopy

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

Mechanistic understanding of geopolymerization at the initial stage: Ab initio molecular dynamics simulations

Reaction mechanism, kinetics and high temperature transformations of geopolymers

Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans

Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Physico-chemical properties and durability of a fly-ash-based geopolymer

Geopolymers made using organic bases. Part I: Synthesis and atomic structure

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

Impact of NH4OH treatment on the ion exchange and pore characteristics of a metakaolin-based geopolymer

Effect of PVA/SiO2 NPs Additive on the Structural, Durability, and Fire Resistance Properties of Geopolymers

Mitigation of efflorescence for multi-componential geopolymer: Influence of steel slag, flue gas desulfurization gypsum and pre-curing periods

Exploring the chemistry of metakaolin-based geopolymers