Abstract:AbstractBonding of fiber posts using self-adhesive resin cement to radicular dentin is controversial. The aim was to evaluate the effect of conditioning of polyacrylic acid on the longevity of bonding of self adhesive resin cement to dentin. Thirty six single rooted pre molars were divided into 3 groups (n=12) ARC: ScotchBond Multi Purpose + RelyXTMARC; U: RelyXTMU200; PU: 11.5% Polyacrylic acid + RelyXTMU200. After conditioning of the dentin, the resin cement and the post were inserted and light-activated for 60s (1200mw/cm2) and stored in distilled water (24h/37oC). Two discs of 1 mm thickness were obtained from each root-third and tested in push-out (0.5mm/min) after 24 hours and 6 months. For statistical purposes, the data from the root thirds were grouped and the bond strength (in MPa) was analyzed using Two-Way Analysis of Variance and Tukey’s post-hoc test at 5%. The power of the test was calculated. The bonding of the U at 6 months was higher than PU at both times (p<0.001). There were no differences for time (p=0.153) or for the interaction of treatment x time (p=0.090). Adhesive fractures between the cement and dentin were prevalent. The power test was 0.97. The bonding of the RelyXTMU200 was influenced by the dentin pre-treatment with poliacrylic acid and the bonding of all groups remained stable for 6 months.Keywords: Dental Cements. Dentin. Shear Strength.ResumoA adesão de pino de fibra de vidro com cimento resinoso autoadesivo à dentina é controversa. Foi objetivo avaliar o efeito do condicionamento da dentina com ácido poliacrílico na longevidade da adesão de cimento resinoso autoadesivo. Trinta e seis raízes de pré-molares uni radiculados foram divididas em 3 grupos (n=12) ARC: ScotchBond Multi Purpose + RelyXTMARC; U: RelyXTMU200; PU: Ácido poliacrílico 11,5% + RelyXTMU200. Após condicionamento da dentina, o cimento resinoso e o pino de fibra de vidro foram inseridos, fotoativados por 60s (1200mw/cm2) e armazenados em água destilada (24h/37oC). Dois discos de dentina de 1 mm de espessura foram obtidos de cada terço radicular e testados em push-out (0.5mm/min) após 24 houras e 6 meses. Para análise estatística, os dados dos terços radiculares foram agrupados e resistência adesiva (em MPa) analisada por Análise de Variância de dois fatores e teste de Tukey a 5%. O poder do teste foi calculado. A adesão de the U após 6 meses foi maior que a de PU nos dois períodos (p<0,001). Não houve diferença para o fator tempo (p=0,153) nem para a interação tratamento x tempo (p=0,090). Fraturas adesivas prevaleceram entre cimento e dentina. O poder do teste calculado foi de 0,97. A adesão do RelyXTMU200 foi influenciada pelo pré-tratamento da dentina com ácido poliacrílico e a adesão de todos os grupos se manteve estável até 6 meses.Palavras-chave: Cimentos Dentários. Dentina. Resistência ao Cisalhamento.

Avaliação do desempenho mecânico e absorção capilar de concretos com incorporação de aditivos cristalizante submetidos a danos nas primeiras idades

Reaproveitamento de perdas de armazenamento: blocos intertravados utilizando concreto autoadensável com adição de finos cerâmicos

Development of cementitious capillary crystalline waterproofing agents and durability study of concrete in the presence of chloride with sulfate in aqueous environment

Análise mecânica de concretos com substituições parciais de agregados por limalha de aço

Influência da incorporação de resíduo de lapidação de vidro nas propriedades da argamassa de cimento Portland

Influence of crystallizing type chemical admixture on precast micro concretes: a statistical analysis and holistic engineering overview

Investigation into the Effects of Crystalline Admixtures and Coatings on the Properties of Self-Healing Concrete

Assessment of self-healing behavior of polypropylene fiber-reinforced cement mortar with crystalline admixture: the effects of crack widths, cracking ages, and external conditions

Influence of an over calcined calcium oxide-based shrinkage-compensating admixture on some properties of a self-compacting concrete

Effect of Polyacrylic Acid Conditioning on the Longevity of Bonding of Self - Adhesive Resin Cement to Dentin

The Effects of Crystalline Admixture on the Self-Healing Performance and Mechanical Properties of Mortar with Internally Added Superabsorbent Polymer

Effect of self-healing in closing cracks from the sulfate attack in Portland, supersulfated and alkali-activated cement

Effect of the Combination of Superabsorbent Polymers for Autogenous Shrinkage Control with Steel Fibers of High-Performance Concrete under Uniaxial Tension Using DIC

Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica

Evaluation of the Addition of Polypropylene (PP) Fibers in Self-compacting Concrete (SCC) to Control Cracking and Plastic Shrinkage Between Different Methods

Tensile strength of Ni-Cr copings subjected to inner surface sandblasting using different cementing agents: An in vitro study

The Influence of Superabsorbent Polymers and Nanosilica on the Hydration Process and Microstructure of Cementitious Mixtures

Effect of PVA fibres and crystalline admixtures on the self-healing efficiency under long-term aconstant loading

Self-healing properties of mortar with crystalline admixture: experimental investigation and parameter optimization

Effects on the Properties of Self-Compacting Cement Paste (PAA) with the Addition of Superabsorbent Polymer

Effect of radiopacifier and liquid in the physicochemical and biological properties of calcium silicate clinker Angelus: A laboratory investigation