Abstract:Renewable lignocellulosic biomass is a favorable energy resource since its co-pyrolysis with hydrogen-rich plastics can produce high-yield and high-quality biofuel. In contrast to earlier co-pyrolysis research that concentrated on increasing product yield, this study comprehends the synergistic effects of two distinct feedstocks that were not considered earlier. This work focuses on co-pyrolyzing wheat straw (WS) with non-reusable polyethylene terephthalate (PET) for the production of pyrolysis oil. WS and PET were blended in different ratios (100/0, 80/20, 60/40, 40/60, 20/80, and 0/100), and pyrolysis experiments were conducted in a fixed-bed reactor under different temperatures to assess their synergistic effect on oil yield. Synergy rates of up to 7.78 % were achieved on yield for the blends of plastic and biomass at a temperature of 500 °C. In comparison to individual biomass or plastics, co-pyrolyzing PET-biomass blends demonstrated good process interaction and promoted the yields of value-added products. The heating value of the pyrolysis oils was in the range of 16.45-28.64 MJ/kg, which depends on the amount of plastic present in the feedstock. The physical analysis of the oils shows that they can be used for heat production by direct combustion in boilers or furnaces. The correlation between WS and PET was validated with the aid of Fourier transform infrared spectroscopy (FT-IR) and gas chromatography-mass spectrometry (GC-MS) analysis. The GC-MS result demonstrated the presence of different compounds such as O-H compounds, esters, carbonyl group elements, acids, hydrocarbons, aromatics, and nitrogenated compounds in the pyrolysis oil, which differed based on the proportions of PET in the feedstock. The increased hydrocarbon and reduced oxygen percentages in the pyrolysis oil were implicitly caused by enhanced hydrocarbon pool mechanisms, in which the breakdown of PET may be supplied as a hydrogen donor. Overall, waste lignocellulosic biomass and plastics can be used to produce biofuels, which helps reduce the amount of solid waste that ends up in landfills. This study also revealed that future research should be focused on the reaction mechanisms of WS and PET co-pyrolysis in order to examine the synergistic interactions.

Co-pyrolytic interactions and products of brominated epoxy resin and polyethylene terephthalate: TG-FTIR analysis and machine learning prediction

Synergistic Interaction for Catalytic Co-Pyrolysis of Municipal Paper and Polyethylene Terephthalate Wastes Coupling with Deep Learning Methodology

Co-pyrolysis of cellulose and polyethylene terephthalate by TG-MS: Pyrolysis behavior, conventional gas and solid phase product characteristics.

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Assessment of co-pyrolysis of polyethylene terephthalate with waste cooking oil: Kinetic study and impact on the chemical constituents of the liquid product

A free radical interlocking co-deposition strategy based on the oxidative pyrolysis mechanism of polyethylene terephthalate to achieve green energy recovery

The synergistic pyrolysis effects of polyethylene terephthalate with the additive of sewage sludge

Pyrolysis behaviour and synergistic effect in co-pyrolysis of wheat straw and polyethylene terephthalate: A study on product distribution and oil characterization

Thermal Behavior, Kinetics and Gas Evolution Characteristics for the Co-Pyrolysis of Real-World Plastic and Tyre Wastes

Co-pyrolysis mechanism of PP and PET under steam atmosphere

A study of polyethylene glycol terephthalate (PET) pyrolysis mechanisms using reactive molecular dynamic simulations

Pyrolysis of polyester and viscose fiber over ZSM-5: synergistic effect and distribution of products

Understanding Rapid PET Degradation via Reactive Molecular Dynamics Simulation and Kinetic Modeling

Investigating the interactions between lignocellulosic biomass and synthetic polymers during co-pyrolysis by simultaneous thermal and spectroscopic methods

Co-pyrolysis characteristic of sugarcane waste with polyethylene terephthalate: thermal decomposition, product distribution, synergistic effect, and kinetics analysis

Synergistic effects and products yield analyses based on co-pyrolysis of poplar tree and rape stalks with polyethylene terephthalate and polypropylene

Co-pyrolysis Behaviors of Coal and Polyethylene by Combining In-Situ Py-TOF-MS and Reactive Molecular Dynamics

Co-pyrolysis performances, synergistic mechanisms, and products of textile dyeing sludge and medical plastic wastes

Insight into the Competitive Reaction Mechanism of Polyethylene Terephthalate (PET) Pyrolysis by ReaxFF-based Reactive Molecular Dynamics Simulation

Fast Co-Pyrolysis of Corncob with Plastics: Evaluation of Thermal Behavior Using Deconvolution Procedure, Kinetic Analysis and Product Characterization

Co-pyrolysis Characteristics and Synergistic Interaction of Waste Polyethylene Terephthalate and Woody Biomass towards Bio-Oil Production