Abstract:Biomass is one of the promising alternative materials to solve the energy and environmental crisis. Fast pyrolysis is one of the most economical and commercially realizable technologies to convert biomass to useable fuels and chemicals. To improve the liquid products, co-pyrolysis with polypropylene (PP) over a mesoporous catalyst MCM-41 was studied in this paper. Thermogravimetry Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis gas chromatography mass spectrometry (Py-GC MS) were used as the main analysis methods to study the mass loss and detailed products of the co-pyrolysis. The mass loss, main functional groups, and identified products of pyrolysis of cellulose, PP, and their mixture were analyzed and discussed. All of the TG, FTIR, and Py-GC MS data show that there is no significant synergism between cellulose and PP when simply mixing them, although the C/H-eff of the mixture increases from 0 to 1.3. However, the addition of MCM-41 bring significant synergism. The TG and differential thermogravimetry (DTG) data show that the co-pyrolysis with MCM-41 shifts the decomposition of PP to a lower temperature, which provides more overlap between cellulose and PP in the range of 300-400 degrees C. According to the FTIR spectra, CO, CO2, and carbonyl are also produced in the peak for pyrolysis of PP for the mixture together with MCM-41, which indicates the intermolecular synergetic reaction. Furthermore, the results from Py-GC MS show that olefins (43.9%), oxygenated compounds (24.8%, mainly alcohols), and aromatics (17.8%) are the main products of co-pyrolysis of cellulose and PP in the presence of MCM-41, while oxygenated compounds (82.2%, mainly saccharides), olefins (4.7%), and aromatics (1.1%) will be the main products without the catalyst. Olefins and alcohols are Much more than the calculated value, which is the main result of synergism. Alcohols are mainly produced from the radical from the cracking of PP combined with the hydroxyl radical produced from decomposition of cellulose. Olefins are produced from the interaction reaction (carbenium ion reaction and beta-scission) between the primary products of cellulose and the hydrocarbon pool reaction of primary products of cellulose and PP. The results of this study enhance the understanding of co-pyrolysis of cellulose and PP in the presence of MCM-41 and provide the possible pathway of modifying the special pyrolysis products in catalytic pyrolysis of biomass with polymers.

Synergistic effects and products yield analyses based on co-pyrolysis of poplar tree and rape stalks with polyethylene terephthalate and polypropylene

Synergistic effects and products distribution during Co-pyrolysis of biomass and plastics

Factors Influencing Synergistic Pyrolysis of Biomass and Polypropylene for Alcohols and Hydrocarbon Production

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Co-pyrolysis of cellulose and polyethylene terephthalate by TG-MS: Pyrolysis behavior, conventional gas and solid phase product characteristics.

Pyrolysis behaviour and synergistic effect in co-pyrolysis of wheat straw and polyethylene terephthalate: A study on product distribution and oil characterization

A comparative study on co-pyrolysis of lignocellulosic biomass with polyethylene terephthalate, polystyrene, and polyvinyl chloride: Synergistic effects and product characteristics

Synergistic interactions and co-pyrolysis characteristics of lignocellulosic biomass components and plastic using a fast heating concentrating photothermal TGA system

Comparative Study on Synergistic Effects in Co-Pyrolysis of Tobacco Stalk with Polymer Wastes: Thermal Behavior, Gas Formation, and Kinetics

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Investigating the interactions between lignocellulosic biomass and synthetic polymers during co-pyrolysis by simultaneous thermal and spectroscopic methods

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Insight into synergistic effects of biomass-polypropylene co-pyrolysis using representative biomass constituents

Co-pyrolysis of corn stalk and high-density polyethylene with emphasis on the fibrous tissue difference on thermal behavior and kinetics

Synergistic Effects on Char and Oil Produced by the Co-Pyrolysis of Pine Wood, Polyethylene and Polyvinyl Chloride

Synergetic Effect of Co-pyrolysis of Cellulose and Polypropylene over an All-Silica Mesoporous Catalyst MCM-41 Using Thermogravimetry–Fourier Transform Infrared Spectroscopy and Pyrolysis–Gas Chromatography–Mass Spectrometry

Studies on synergistic effects in co-pyrolysis of sargassum and poplar: thermal behavior and kinetics

Thermal and kinetic behaviors of corn stover and polyethylene in catalytic co-pyrolysis

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Co-pyrolysis of biomass and polyethylene: Mechanistic insights into functional group transformations on solid matrix

Impact of plastic type on synergistic effects during co-pyrolysis of rice husk and plastics