Abstract:Rare earth elements have excellent catalytic effects on improving hydrogen storage properties of the Mg 2 Ni-based alloys. This study used a small amount of Y to substitute Mg partially in Mg 2 Ni 0.9 Co 0.1 and characterized and discussed the effects of Y on the solidification and de-/hydrogenation behaviors. The Mg 2−x Y x Ni 0.9 Co 0.1 (x = 0, 0.2, 0.3, and 0.4) hydrogen storage alloys were prepared using a metallurgy method. The phase composition of the alloys was studied using X-ray diffraction (XRD). Additionally, their microstructure and chemical composition were studied using scanning electron microscopy and energy-dispersive X-ray spectroscopy, respectively. The hydrogen absorption and desorption properties of the alloys were studied using pressure-composition isotherms and differential scanning calorimetric (DSC) measurements. The structure of the as-cast Mg 2 Ni 0.9 Co 0.1 alloy was composed of the peritectic Mg 2 Ni, eutectic Mg–Mg 2 Ni, and a small amount of pre-precipitated Mg–Ni–Co ternary phases, and was converted into the Mg 2 NiH 4 , Mg 2 Ni 0.9 Co 0.1 H 4 , and MgH 2 phases after hydrogen absorption. Furthermore, the XRD patterns of the alloys showed the MgYNi 4 phase and a trace amount of the Y 2 O 3 phase along with the Mg and Mg 2 Ni phases after the addition of Y. After hydrogen absorption, the phase of the alloys was composed of the Mg 2 NiH 4 , MgH 2 , MgYNi 4 , YH 3 , Y 2 O 3 , and Mg 2 NiH 0.3 phases. With the increase of Y addition, the area ratios of the peritectic Mg 2 Ni matrix phase in the Mg 2−x Y x Ni 0.9 Co 0.1 (x = 0, 0.2, 0.3, and 0.4) alloys gradually decreased until they disappeared. However, the eutectic structure gradually increased, and the microstructures of the alloys were obviously refined. The addition of Y improves the activation performance of the alloys. The alloy only needed one cycle of de-/hydrogenation to complete the activation for x = 0.4. The DSC curves showed that the initial dehydrogenation temperatures of Mg 2 Ni 0.9 Co 0.1 and Mg 1.8 Y 0.2 Ni 0.9 Co 0.1 were 200 and 156 °C, respectively. The desorption activation energies of the hydrides of the Mg 2 Ni 0.9 Co 0.1 and Mg 1.8 Y 0.2 Ni 0.9 Co 0.1 alloys calculated using the Kissinger method were 94.7 and 56.5 kJ/mol, respectively. Moreover, the addition of Y reduced the initial desorption temperature of the alloys and improved their kinetic properties.

Study on the mechanism of co-catalyzing Mg–Al–Y hydrogen storage alloys with Co@C and multiple fluorides

Fluorinated Carbon Tubes As Carriers for MgH2 with Enhanced Hydrogen Storage Performances

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Improved hydrogen storage performances of the as-milled Mg-Al-Y alloy by co-doping of Tm@C (Tm = Fe, Co, Cu)

Achieving superior hydrogen storage properties of MgH<sub>2</sub> by the effect of TiFe and carbon nanotubes

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Study on Microstructure and Hydrogen Storage Properties of Mg80Ni16−xAlxY4 (x = 2, 4, 8) Alloys

Influence of porous carbon loaded with iron particles on hydrogen storage performances of as-milled Mg-Al-Y alloy

Study on in situ modification mechanism of mg-Ce-Y based hydrogen storage alloy by ZnF 2

In-situ influence of TiF 3 catalyst on the hydrogen storage behavior of Mg-Ni-Y based alloy

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Microstructure and hydrogen storage properties of the Mg2−xYxNi0.9Co0.1 (x = 0, 0.2, 0.3, and 0.4) alloys

Hydrogen Storage Properties of Mg-doped Ti 1.2 Fe Alloys Synthesized by Mechanical Alloying

Carbon composite support improving catalytic effect of NbC nanoparticles on the low-temperature hydrogen storage performance of MgH2

Enhanced Hydrogen Storage Properties of MgH2 by the Synergetic Catalysis of Zr0.4Ti0.6Co Nanosheets and Carbon Nanotubes

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

Characterization on the kinetics and thermodynamics of Mg-based hydrogen storage alloy by the multiple alloying of Ce, Ni and Y elements

Sodium fluotitanate with the formation of multicomponent catalytic species for superior hydrogen storage of magnesium hydride

Significantly improved hydrogen storage properties of Mg90Al10 catalyzed by TiF3

Improved Hydrogen Storage Performance of MgH2–NaAlH4 Composite by Addition of TiF3

MOF-derived carbon supported transition metal (Fe, Ni) and synergetic catalysis for hydrogen storage kinetics of MgH 2