Abstract:Chalcogenide perovskites have emerged as promising semiconductor materials due to their appealing properties, including tunable bandgaps, high absorption coefficients, reasonable carrier lifetimes and mobilities, excellent chemical stability, and environmentally benign nature. However, beyond the well-studied BaZrS3, reports on chalcogenide perovskite thin films with diverse compositions are scarce. In this study, the realization of four different types of chalcogenide perovskite thin films with controlled phases, through CS2 annealing of amorphous chalcogenide precursor films deposited by pulsed laser deposition (PLD), is reported. This achievement is guided by a thorough theoretical investigation of the phase stability of chalcogenide perovskites. Upon crystallization in the distorted perovskite phase, all materials exhibit photoluminescence (PL) with peak positions in the visible range, consistent with their expected bandgap values. However, the full-width-at-half-maximum (FWHM) of the PL spectra varies significantly across these materials, ranging from 99 meV for SrHfS3 to 231 meV for BaHfS3. The difference is attributed to the difference in kinetic barriers between local structural motifs for the Sr and Ba compounds. The findings underscore the promise of chalcogenide perovskite thin films as an alternative to traditional halide perovskites for optoelectronic applications, while highlighting the challenges in optimizing their synthesis and performance. Four types of chalcogenide perovskite thin films with controlled phases are realized. They exhibit bandgaps and photoluminescence (PL) in the visible range. The significant variation in PL width across the barium- and strontium-based perovskites is attributed to the difference in kinetic barriers.image

Solution-based Sb2Se3 thin films for microphotonics

Solution-derived Ge-Sb-Se-Te phase-change chalcogenide films

Chalcogenide Coatings of Ge_15Sb_20S_65 and Te_20As_30Se_50

Magnetron-sputtered and Thermal-Evaporated Low-Loss Sb-Se Phase-Change Films in Non-Volatile Integrated Photonics

Solution-Mediated Inversion of SnSe to Sb2Se3 Thin-Films

Solution Processing and Resist‐Free Nanoimprint Fabrication of Thin Film Chalcogenide Glass Devices: Inorganic–Organic Hybrid Photonic Integration

Reversible Thermally Driven Phase Change of Layered In2Se3 for Integrated Photonics.

Time-resolved reversible optical switching of the ultralow-loss phase change material Sb2Se3

Effect of Annealing Conditions on the Physio-Chemical Properties of Spin-Coated As2se3 Chalcogenide Glass Films

Chalcogenide glass based integrated photonics

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

Chalcogenide Glass Planar Photonics: from Mid-Ir Sensing to 3-D Flexible Substrate Integration

Cl−1 Doped Sb2Se3 Polycrystals and Films for Optoelectric Application

Large-area optoelectronic-grade InSe thin films via controlled phase evolution

Solution processed multi-layered thin films of Ge20Sb5S75 and Ge20Sb5Se75 chalcogenide glasses

Charge-Carrier Dynamics of Solution-Processed Antimony- and Bismuth-Based Chalcogenide Thin Films

Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media

Chalcogenide Perovskite Thin Films with Controlled Phases for Optoelectronics

Multiscale Simulations of Growth-Dominated Sb2Te Phase-Change Material for Non-Volatile Photonic Applications

Substrate-induced phase control of In2Se3 thin films

Study on Fabrication and Optical Properties of Ge-Sb-Se Thin Films