Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In this study, a novel TCU control structure and algorithms including also dynamic model of the transmission will perform the gear shifting of automatic transmissions used in tracked military vehicles are designed. In case of inherent wear of the clutches, the clutch parameters are estimated by means of an adaptation algorithm that uses only the information from the transmission input and output speed sensors. These estimated clutch parameters are used in clutch torque calculation is utilized by control algorithms. For the clutch speed control in the inertia phase, a PID control structure with a negative feedforward term that cancels the nonlinearities of the system is proposed. The feedforward term utilizes the estimated wear clutch coefficients in the calculation of friction coefficients. The parameters of the PID controller are optimized by a genetic algorithm. The designed all structure are firstly tested on a MATLAB/Simulink power train simulation model, and then tested using a unique transmission on a transmission dynamometer test bench to examine its suitability for real transmission scenarios. The performances of proposed PID control and a backstepping nonlinear controller that we constructed for the tracked vehicles are compared with and without clutch wear. Maximum tracking error is decreased by 98% with proposed adaptive PID control structure with nonlinear feedforward term compare to backstepping controller. In the case of clutch wear, the back-stepping control exists in the literature has been found to result in oscillation. By updating the estimated friction coefficient from adaptation algorithm, in the backstepping controller, it is concluded that these oscillations can be eliminated. Additionally, on-off solenoid valves, are widely used, are known to cause torque interruptions and jerks during gear shifting. It has been observed the control structure presented in this study reduced the jerks by one quarter.

Influence of the second-generation adaptive friction clutch configuration method (basic version) for its maximum load

Modernization of the adaptive friction clutch with variable gain (second option)

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Torque capacity of multidisc wet clutch with reference to friction occurrence on its spline connections

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Design of a Friction Clutch Using Dual Belleville Structures

Influences of the Contact State between Friction Pairs on the Thermodynamic Characteristics of a Multi-Disc Clutch

Adaptive torque control of wet dual clutch based on dynamic friction coefficient estimation

The performance of Cu-based friction material in dry clutch engagement

Friction behavior of innovative carbon friction linings for wet multi-plate clutches

Influence of the steel plate on the friction behavior of automotive wet disk clutches

Dynamic modeling, clutch parameter adaptation, and control of automatic transmission for tracked vehicles

Design of a simplified detent clutch using curve arch spring for torque-overload protection

Influence of Material Parameters on the Contact Pressure Characteristics of a Multi-Disc Clutch

Automatic Clutch Control Based on Estimation of Resistance Torque for AMT

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Position-based impedance torque control for automatic clutch with robust predefined-time stability guarantee

Control-oriented modeling of wet clutch friction considering thermal dynamics

Wet Dual Clutch Launching Adaptive Control Considering Service Time