Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

A mathematical model describing an unsteady leak of compressed air from an open underwater storage tank

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Discrete air model for large scale rapid filling process contained entrapped air

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Release Models for Leaks from High-Pressure Hydrogen Storage Systems

Estimating Leaked Hydrogen Gas Flow in Confined Space Through Coupling Zone Model and Point Source Buoyancy Plume Theory

Research on Characteristics of Deep-Sea Implosion Based on Eulerian Finite Element Method

Modelling large scale airgun-bubble dynamics with highly non-spherical features

Analytical and Numerical Predictions of Hydrogen Gas Flow Induced by Wall and Corner Leakages in Confined Space

A compressible two-fluid model for the finite volume simulation of violent aerated flows. Analytical properties and numerical results

Numerical Simulation of Leakage and Diffusion Process of LNG Storage Tanks

High‐pressure under‐expanded hydrogen leakage model considering gas‐wall friction loss

Physical and Mathematical Modeling of Diesel Fuel Liquid and Vapor Movement in Porous Media

Prediction of State Property, Flow Parameter and Jet Flame Size During Transient Releases from Hydrogen Storage Systems

A two-fluid model for violent aerated flows

Mathematical model of salt cavern leaching for gas storage in high-insoluble salt formations

Research on the engineering application of leakage diffusion theory based on finite volume method in LNG pipeline

A mathematical model for calculating the transient volume of gravity currents: An experimental analysis focused on mixing mechanisms and volume growth for accidental releases

Simulation of small-scale releases from liquid hydrogen storage systems

Insights into the characteristics of sheet/cloud cavitation and tip-leakage cavitation based on a compressible Euler-Lagrange model