Physical and Mathematical Modeling of Diesel Fuel Liquid and Vapor Movement in Porous Media

T. E. Johnson,D. K. Kreamer

DOI: https://doi.org/10.1111/j.1745-6584.1994.tb00890.x

1994-07-01

Ground Water

Abstract:Abstract Two‐dimensional physical modeling of diesel fuel leaks was conducted in sand tanks to determine liquid and vapor migration characteristics. Mathematical modeling provided estimation of vapor concentrations at discrete times and distances from the vapor source and was compared to the physical experiment. The mathematical gaseous diffusion model was analogous to the Theis equation for ground‐water flow, accounted for sorptive effects of the media, and was calibrated using measured concentrations from the sand tank. Mathematically different positions of the vapor source were tested to better relate observed liquid flow rates and media configuration to gaseous concentrations. The calculated diffusion parameters were then used to estimate theoretical, three‐dimensional vapor transport from a hypothetical liquid leak of 2.0 1/hr for 30 days. The associated three‐dimensional vapor plume, which would be reasonably detectable by commercially available vadose zone monitors, was estimated to have a diameter of 8 m with a vapor concentration of 50 ppm at the outside edge of the vapor plume. A careful application of the method and values can be used to give a first approximation to the number of vapor monitors required at a field site as well as the optimal locations for the monitors.