Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Influence of Helium Dielectric Barrier Discharge Jet (DBDjet) Plasma Treatment on Bathocuproine (BCP) in p-i-n-Structure Perovskite Solar Cells

Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p–i–n Structure Perovskite Solar Cells

Towards High-Performance Inverted Mesoporous Perovskite Solar Cell by Using Bathocuproine (BCP)

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

Defect control based on interfacial passivation via post-treatment of 1-ethylpyridine hydrobromide for achieving efficient and stable perovskite solar cells

Halogen Bond Involved Post‐Treatment for Improved Performance of Printable Hole‐Conductor‐Free Mesoscopic Perovskite Solar Cells

Barium doping effect on the photovoltaic performance and stability of MA0.4FA0.6BaxPb1-xIyCl3-y perovskite solar cells

Effect of 3,4,9,10-Perylenetetracarboxylic Bisbenzimidazole (ptcbi) As Well As Bathocuproine (bcp) and Ag Interlayer Thickness on the Performance of Organic Tandem Solar Cells

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers

Surface Management for Carbon‐Based CsPbI 2 Br Perovskite Solar Cell with 14% Power Conversion Efficiency

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

2,2′‐Bipyridyl‐4,4′‐Dicarboxylic Acid Modified Buried Interface of High‐Performance Perovskite Solar Cells

Gaining Insight Into The Effect Of Organic Interface Layer On Suppressing Ion Migration Induced Interfacial Degradation In Perovskite Solar Cells

Regulation of the Buried Interface to Achieve Efficient HTL-Free All-Inorganic CsPbI2Br-Based Perovskite Solar Cells

Boosting the performance of low-temperature processed CsPbI2Br planar perovskite solar cells by interface engineering

Tailor‐Made Buffer Materials: Advancing Uniformity and Stability in Perovskite Solar Cells

Increasing the wettability and reducing excess PbI2 using diamine hydrobromides with different lengths at the buried interface of the 3D perovskite film

Performance Enhancement of Evaporated CsPbI 2 Br Perovskite Solar Cells with a CuSCN Hole Transport Layer via a Cesium Bromide Buffer Layer

Surface Re-Engineering of Perovskites with Buckybowls to Boost the Inverted-Type Photovoltaics

Performance Enhancement of Hole Transport Layer-Free Carbon-Based CsPbIBr2 Solar Cells through the Application of Perovskite Quantum Dots