High Selectivity to Aromatics by a Mg and Na Co-modified Catalyst in Direct Conversion of Syngas
Shuo Yang,Minzhe Li,Muhammad Asif Nawaz,Guiyao Song,Wentao Xiao,Zihao Wang,Dianhua Liu
DOI: https://doi.org/10.1021/acsomega.0c01007
IF: 4.1
2020-05-12
ACS Omega
Abstract:The demand for aromatics, especially benzene, toluene, and xylene, has been increased in recent years as the crucial feedstocks of coatings and pharmaceutical industry. In this work, a modified Fischer–Tropsch synthesis (FTS) catalyst FeNaMg was fabricated via a sol-precipitation method and integrated with an HZSM-5 aromatization catalyst for the aromatics synthesis from syngas by a one-step process. Syngas was first converted to lower olefins as intermediates on the active component of the FeNaMg catalyst followed by aromatization on zeolite. Different characterization approaches, such as BET, XRD, XPS, hydrogen temperature-programmed reduction, temperature-programmed desorption of CO, TG, and SEM, revealed that Mg efficiently optimized physicochemical properties of the Fe-based catalyst by generating a MgFe2O4 spinel structure. Further investigation demonstrated that the MgFe2O4 spinel structure could increase the syngas adsorption area, facilitating the reduction and carburization of the Fe phase, while Mg decreased CO2 selectivity (31.26 to21%) by restraining the water–gas shift reaction and improved the utilization efficiency of carbon. At the same time, alkali metal Na changed the surface electronic environment of the FTS catalyst to enhance CO adsorption as an electronic promoter, which suppressed methane formation by restraining over hydrogenation. Therefore, the synergism that existed between Mg and Na during the reaction escalated the CO conversion and aromatics selectivity to 96.19 and 51.38%, respectively.This article has not yet been cited by other publications.
chemistry, multidisciplinary