Corrigendum: Modeling How Interface Geometry and Mechanical Stress Affect Li Metal/Solid Electrolyte Current Distributions [J. Electrochem. Soc., 170, 020524 (2023)]

Eric A Carmona,Paul Albertus

DOI: https://doi.org/10.1149/1945-7111/ad6693

IF: 3.9

2024-07-23

Journal of The Electrochemical Society

Abstract:Abstract This is a Corrigendum to an existing publication.

electrochemistry,materials science, coatings & films

What problem does this paper attempt to address?

Erratum: Revealing the Mechanism Behind Sudden Capacity Loss in Lithium Metal Batteries ]

Meinan He,Charles Wampler,Louis Hector,Michael Dato,Suryanarayana Kolluri,Khalil Amine,Chi-Cheung Su,Mei Cai

DOI: https://doi.org/10.1149/1945-7111/ad1f36

IF: 3.9

2024-01-17

Journal of The Electrochemical Society

Abstract:We wish to submit the attached corrigendum letter that details some corrections to our paper: "Revealing the Mechanism behind Sudden Capacity Loss in Lithium Metal Batteries using Fluorinated Electrolyte" (J. Electrochem. Soc., 3170 00528 (2023)). In the corrigendum, we addressed minor errors and improved the clarity of our figures by replacing Figures 1, 2, and 5 with more lucid plots. Simultaneously, we rectified a typographical error in Figure 10 and refined the layout of Equations 5, 7, and 9 for a clearer presentation.

electrochemistry,materials science, coatings & films
Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Jiehui Liu,Hongjun Hu,Yang Liu,Dingfei Zhang,Zhongwen Ou,Yan Zhi

DOI: https://doi.org/10.1515/mt-2023-8002

2023-06-16

Materialpruefung/Materials Testing

Abstract:Corrigendum to: Jiehui Liu, Hongjun Hu, Yang Liu, Dingfei Zhang, Zhongwen Ou and Yan Zhi, "Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61," Materials Testing , vol. 62, no. 4, pp. 395–399, 2020 (https://doi.org/10.3139/120.111476). As Figures 5a and c have already been published in other articles, the authors wish to replace them by the following figures: Worn surface morphology under load 5 N and reciprocating frequency 2 Hz of magnesium alloy made by a) CE process, b) DE process, c) friction coefficients varying with different loads of dry sliding. The authors would like to apologize for any inconvenience caused. © 2023 Walter de Gruyter GmbH, Berlin/Boston
Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Wang Haibo,Song Guolin,Tang Guoyi

DOI: https://doi.org/10.1016/j.msea.2017.05.119

2017-01-01

Abstract:The authors regret that Fig. 12C is not appearing correctly, and should be replaced with the following: The authors would like to apologise for any inconvenience caused. © 2017
Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Fang‐Ze Li,Gen-Wen Hsieh,S. H. Dalal,Mary Newton,J.E. Stott,Pritesh Hiralal,Arokia Nathan,P. A. Warburton,Hüsnü Emrah Ünalan,Paul Beecher,Andrew J. Flewitt,Ian Robinson,G.A.J. Amaratunga,W. I. Milne

DOI: https://doi.org/10.1109/ted.2008.2010442

2009-01-01

Abstract:In our paper [F.M. Li et al., 2008], two errors were noticed after the paper went to press. On page 3002, near the middle of the left column, it should say "In this method, zinc oxide and carbon powders are mixed together, usually in a ZnO:C ratio of 1: 1 or 1:4 by weight." In Fig. 8, on page 3005, the x-axis label should say "energy (eV)" instead of "wavelength (eV)." Also, this paper should have been designated as Invited, as it is now above.
Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

J F Zhou,C Y Liu,K Z He,X X Wei

DOI: https://doi.org/10.1016/j.heliyon.2024.e28814

IF: 3.776

2024-03-30

Heliyon

Abstract:[This corrects the article DOI: 10.1016/j.heliyon.2024.e24428.].
Publisher Correction: An electrically conductive silver–polyacrylamide–alginate hydrogel composite for soft electronics

Yunsik Ohm,Chengfeng Pan,Michael J. Ford,Xiaonan Huang,Jiahe Liao,Carmel Majidi

DOI: https://doi.org/10.1038/s41928-021-00571-3

IF: 33.255

2021-03-31

Nature Electronics

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41928-021-00571-3.

engineering, electrical & electronic
Corrigendum: Solvent Mediated Fabrication of Ditched Hollow Indium Sulfide Spheres for Overall Electrocatalytic Water Splitting ]

umair shamraiz

DOI: https://doi.org/10.1149/1945-7111/ad86ef

IF: 3.9

2024-10-17

Journal of The Electrochemical Society

Abstract:Corrigendum: Solvent Mediated Fabrication of Ditched Hollow Indium Sulfide (In2S3) Spheres for Overall Electrocatalytic Water Splitting [J. Electrochem. Soc., 168, 066510 (2021)]

electrochemistry,materials science, coatings & films
Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Yan Xu,Guangmin Zhou,Shuyang Zhao,Wanfei Li,Feifei Shi,Jia Li,Jun Feng,Yuxing Zhao,Yang Wu,Jinghua Guo,Yi Cui,Yuegang Zhang

DOI: https://doi.org/10.1002/advs.201903603

2020-01-01

Abstract:[This corrects the article DOI: 10.1002/advs.201800981.].
Erratum: Good Structural Stability of Si Anodes Achieved through Dispersant Addition and Use of Carbon Fabric as Conductive Framework [ J. Electrochem. Soc., 168, 060517 (2021)]

Sheng-Yu He,Chuan-Sheng Cho,Jhewn-Kuang Chen,Chia-Chen Li

DOI: https://doi.org/10.1149/1945-7111/ac0ba7

IF: 3.9

2021-06-01

Journal of The Electrochemical Society

Abstract:Due to an error in the production process an incorrect version of Fig. 6a was used. The correct figure is shown below:

electrochemistry,materials science, coatings & films
Correction: Ab Initio and Empirical Defect Modeling of LaMnO3±δ for Solid Oxide Fuel Cell Cathodes

Yueh‐Lin Lee,Shenzhen Xu,Dane Morgan

DOI: https://doi.org/10.1039/c6cp90049f

2016-01-01

Abstract:Correction for ‘Ab initio and empirical defect modeling of LaMnO3±δ for solid oxide fuel cell cathodes’ by Yueh-Lin Lee et al., Phys. Chem. Chem. Phys., 2012, 14, 290–302.
Correction: The role of substituents in determining the redox potential of organic electrode materials in Li and Na rechargeable batteries: electronic effects vs. substituent-Li/Na ionic interaction

Sechan Lee,Ji Eon Kwon,Jihyun Hong,Soo Young Park,Kisuk Kang

DOI: https://doi.org/10.1039/d0ta90023k

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘The role of substituents in determining the redox potential of organic electrode materials in Li and Na rechargeable batteries: electronic effects vs. substituent-Li/Na ionic interaction’ by Sechan Lee et al. , J. Mater. Chem. A , 2019, 7 , 11438–11443.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Yangang Wang,Xiang Ding,Lihua Huang,Yangling Xu,Yuanhui Zuo,Shifei Kang,Lifeng Cui

DOI: https://doi.org/10.1016/s1452-3981(23)16178-5

IF: 1.541

2016-01-01

International Journal of Electrochemical Science

Abstract:This is an erratum regarding the published article (Int. J. Electrochem. Sci., 11 (2016) 2461- 2472), which has a mistake in the AUTHORS INFORMATION part.
Publisher Correction: an Electrochemical Thermal Transistor

Sood, Aditya,Xiong, Feng,Chen, Shunda,Wang, Haotian,Selli, Daniele,Zhang, Jinsong,McClellan, Connor J.,Sun, Jie,Donadio, Davide,Cui, Yi,Pop, Eric,Goodson, Kenneth E.

DOI: https://doi.org/10.1038/s41467-019-12471-4

IF: 16.6

2019-01-01

Nature Communications

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.
Publisher Correction: Operando monitoring the lithium spatial distribution of lithium metal anodes

Shasha Lv,Tomas Verhallen,Alexandros Vasileiadis,Frans Ooms,Yaolin Xu,Zhaolong Li,Zhengcao Li,Marnix Wagemaker

DOI: https://doi.org/10.1038/s41467-018-05212-6

2018-07-19

Abstract:The original HTML version of this Article omitted to list Zhengcao Li as a corresponding author. Correspondingly, the original PDF version of this Article incorrectly stated that 'Correspondence and requests for materials should be addressed to M.W. (email: m.wagemaker@tudelft.nl)', instead of the correct 'Correspondence and requests for materials should be addressed to Z.L. (email: zcli@tsinghua.edu.cn) or to M.W. (email: m.wagemaker@tudelft.nl)'. This has been corrected in both the PDF and HTML versions of the Article.
Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Jiangyan Wang,Hongjie Tang,Lijuan Zhang,Hao Ren,Ranbo Yu,Quan Jin,Jian Qi,Dan Mao,Mei Yang,Yun Wang,Porun Liu,Yu Zhang,Yuren Wen,Lin Gu,Guanghui Ma,Zhiguo Su,Zhiyong Tang,Huijun Zhao,Dan Wang

DOI: https://doi.org/10.1038/nenergy.2016.72

IF: 56.7

2016-01-01

Nature Energy

Abstract:Nature Energy 1, 16050 (2016); published 29 April 2016; corrected 11 May 2016. In the version of this Article originally published the numbering of the author affiliations was incorrect.
Erratum: Publisher's Note: "Magnetic force-based cell manipulation for in vitro tissue engineering" [APL Bioeng. 7, 031504 (2023)]

Huiqian Hu,L Krishaa,Eliza Li Shan Fong

DOI: https://doi.org/10.1063/5.0181312

2023-10-20

Abstract:[This corrects the article DOI: 10.1063/5.0138732.].
Corrigendum to “surface Effect on the Contact Problem of a Piezoelectric Half-Plane” [int. J. Solids Struct, 185-186 (2020) 380–393]

Hongxia Song,Liao-Liang Ke,Jie Su,Jie Yang,S. Kitipornchai,Yue‐Sheng Wang

DOI: https://doi.org/10.1016/j.ijsolstr.2020.03.002

IF: 3.667

2020-01-01

International Journal of Solids and Structures

Abstract:This corrigendum corrects some errors of the paper entitled “Surface effect on the contact problem of a piezoelectric half-plane”, International Journal of Solids and Structures 185-186 (2020) 380–393 (Song et al., 2020). Because there is an error in the Fortran code when we calculate the numerical solution of the contact stress and electric displacement, their values become smaller compared to the original results. Moreover, the influencing trends of the surface effect are slightly different from the original results. However, the formulations of the original paper are intact.
Corrigendum: Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries

Hao‐Jie Liang,Zhen‐Yi Gu,Xinxin Zhao,Jin‐Zhi Guo,Jia‐Lin Yang,Wen‐Hao Li,Bao Li,Zhi‐Ming Liu,Wen‐Liang Li,Xing‐Long Wu

DOI: https://doi.org/10.1002/anie.202200695

2022-01-01

Angewandte Chemie

Abstract:In this Research Article, the calculated concentration values for all five electrolytes (i.e., ND-1, ND-2, NDD-3, 2.83 m NaPF6 in DEGDME, and 3.2m-NaPF6 in DEGDME/DOL) are inaccurate. Owing to the miscalculation for molality, the corresponding descriptions of electrolyte concentration in the main text and Supporting Information are inconsistent with the electrolytes that were actually used. After careful recalculation, the relevant text should be modified as follows: In the Introduction section, “3.04 m NaPF6 in diethylene glycol dimethyl ether (DEGDME) with the addition of 1,3-dioxolane (DOL) diluent (10:1 by volume ratio)” should be revised to “3.36 m NaPF6 in diethylene glycol dimethyl ether (DEGDME) with the addition of 1,3-dioxolane (DOL) diluent (10:1 by volume ratio)” based on the following equation and calculation: Where the density and molecular weight (M) of DEGDME is 0.94 g/mL and 134.17. The density and M of DOL is 1.06 g/mL and 74.08. The molar (m) ratio of NaPF6/DEGDME/DOL is almost equivalent to 5:10:2 for actual NDD-3 electrolyte. Similarly, “0.94 m NaPF6 in DEGDME” (i.e., ND-1), “1.88 m NaPF6 in DEGDME” (i.e., ND-2), “2.83 m NaPF6 in DEGDME”, and “3.2m-NaPF6 in DEGDME/DOL” should be “1.06 m NaPF6 in DEGDME”, “2.13 m NaPF6 in DEGDME”, “3.19 m NaPF6 in DEGDME”, and “3.83m-NaPF6 in DEGDME/DOL”, respectively, in the main text and/or Supporting Information. These changes are due to a miscalculation, rather than the experimental processes, and do not affect the interpretation of the data, discussion, or conclusions. The main contents and conclusions of the original Research Article are not affected by this Corrigendum. The authors apologize for this oversight, and thank Mr. Xiangjun Pu and Prof. Yuliang Caofrom Wuhan University for making us aware of this issue.
Erratum: "A Numerical Scheme for Anisotropic Reactive Nonlinear Viscoelasticity" [ASME J. Biomech Eng., 2023, 145(1), p. 011004; DOI: 10.1115/1.4054983]

Gerard A Ateshian,Courtney A Petersen,Steve A Maas,Jeffrey A Weiss

DOI: https://doi.org/10.1115/1.4065342

2024-10-01

Abstract:In this erratum, we correct a mistake in a subcomponent of the numerical algorithm proposed in our recent study for modeling anisotropic reactive nonlinear viscoelasticity (doi:10.1115/1.4054983), for the special case where multiple weak bond families may be recruited with loading. This correction overcomes a nonphysical response noted under uni-axial cyclical loading.
Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Jin Su,Mauro Pasta,Ziyang Ning,Xiangwen Gao,Peter G. Bruce,Chris R. M. Grovenor

DOI: https://doi.org/10.1039/d3ee90006a

2023-01-01

Abstract:Correction for ‘Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers’ by Jin Su et al., Energy Environ. Sci., 2022, 15, 3805–3814, https://doi.org/10.1039/D2EE01390H.

Corrigendum: Modeling How Interface Geometry and Mechanical Stress Affect Li Metal/Solid Electrolyte Current Distributions [J. Electrochem. Soc., 170, 020524 (2023)]

Erratum: Revealing the Mechanism Behind Sudden Capacity Loss in Lithium Metal Batteries ]

Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Publisher Correction: An electrically conductive silver–polyacrylamide–alginate hydrogel composite for soft electronics

Corrigendum: Solvent Mediated Fabrication of Ditched Hollow Indium Sulfide Spheres for Overall Electrocatalytic Water Splitting ]

Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Erratum: Good Structural Stability of Si Anodes Achieved through Dispersant Addition and Use of Carbon Fabric as Conductive Framework [ J. Electrochem. Soc., 168, 060517 (2021)]

Correction: Ab Initio and Empirical Defect Modeling of LaMnO3±δ for Solid Oxide Fuel Cell Cathodes

Correction: The role of substituents in determining the redox potential of organic electrode materials in Li and Na rechargeable batteries: electronic effects vs. substituent-Li/Na ionic interaction

Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Publisher Correction: an Electrochemical Thermal Transistor

Publisher Correction: Operando monitoring the lithium spatial distribution of lithium metal anodes

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Erratum: Publisher's Note: "Magnetic force-based cell manipulation for in vitro tissue engineering" [APL Bioeng. 7, 031504 (2023)]

Corrigendum to “surface Effect on the Contact Problem of a Piezoelectric Half-Plane” [int. J. Solids Struct, 185-186 (2020) 380–393]

Corrigendum: Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries

Erratum: "A Numerical Scheme for Anisotropic Reactive Nonlinear Viscoelasticity" [ASME J. Biomech Eng., 2023, 145(1), p. 011004; DOI: 10.1115/1.4054983]

Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers