Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Harnessing the potential of electrospun TiO 2 nanofibers and nanoparticles enriched with natural dyes: a path towards affordable aolutions for low-cost electronic devices

Low-Cost Fabrication of TiO2 Nanorod Photoelectrode for Dye-sensitized Solar Cell Application

Electrospinning of Cu Doped TiO2 Nanofibers and their Potential Application in Photoanode of Dye-Sensitized Solar Cells

Nanoengineering TiO2 for evaluating performance in dye sensitized solar cells with natural dyes

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

Conjugated Polymer-Sensitized Solar Cells Based on Electrospun Tio2 Nanofiber Electrode

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

Enhanced Electrical Transport Properties of Beetroot Dye-Based Thin Film in Presence of Titanium Dioxide Nanoparticles

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

A novel low-cost, one-step and facile synthesis of TiO2 for efficient fiber dye-sensitized solarcells

Facial Synthesis of SnO2 Nanoparticle Film for Efficient Fiber-Shaped Dye-Sensitized Solar Cells

Milling Processing, Morphology, and Optical Characterization of Powders from Natural Pigments as a Potential Sensitizing Material for Optical Sensors and Dye-Sensitized Solar Cells

Efficiency and stability improvement of natural dye‐sensitized solar cells using the electrospun composite of TiO2 nanofibres doped by the bio‐Ca nanoparticles

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Electrospinning Synthesis and Electrocatalytic Performance of Iron Oxide/carbon Nanofibers Composites As a Low-Cost Efficient Pt-free Counter Electrode for Dye-Sensitized Solar Cells

Enhanced Efficiency of Dye Sensitized Solar Cell Using Eu Doped TiO2-ZrO2 Nanocomposite

TiO 2 nanoparticle seeds transformed into nanotubes for effective dye-sensitized solar cell application

Comparison of Electrospun Titania and Zinc Oxide Nanofibers for Perovskite Solar Cells and Photocatalytic Degradation of Methyl Orange Dye

Improving of the Photovoltaic Characteristics of Dye-Sensitized Solar Cells Using a Photoelectrode with Electrospun Porous TiO2 Nanofibers

Substrate Diameter-Dependent Photovoltaic Performance of Flexible Fiber-Type Dye-Sensitized Solar Cells with TiO2 Nanoparticle/TiO2 Nanotube Array Photoanodes

Anatase Mesoporous Tio2 Nanofibers with High Surface Area for Solid-State Dye-Sensitized Solar Cells