Abstract:A nanoporous composite film combined of conducting inorganic template (TiO2/SnO2) and conducting polymer catalyst (poly(3,4-ethylenedioxythiophene):polystyrenesulfonate, PEDOT:PSS) was developed as an alternative counter electrode for dye-sensitized solar cell (DSSC) through low temperature process. The TiO2/SnO2 template was first fabricated by coating a homogeneous TiO2 nanoparticles. blended paste containing a SnCl4 aqueous solution on the conductive substrate, followed by annealing at 150 degrees C. The counter electrode was then completed by spin coating the PEDOT:PSS aqueous solution into the template and drying at 80 degrees C. The obtained TiO2/SnO2/PEDOT:PSS (TSP) composite film exhibits more excellent catalytic activity for the triiodide reduction than the pristine PEDOT:PSS film, resulting in the significant improvements in the fill factor and efficiency of the cells. The values of the fill factor and efficiency respectively increase from 0.564 and 4.79% to 0.699 and 6.54%. Noted that the photovoltaic performances of the TSP based DSSC is very similar to those of the Pt based one. The fill factor and efficiency of the later are 0.696 and 6.48%, respectively. The outstanding properties of the TSP composite film used as the counter electrode can be ascribed to its prominent synergistic effects. In the TSP composite film, the conducting TiO2 is applied as the main skeleton material with the in-situ formed SnO2 as a binder to construct a nanoporous structure for the PEDOT:PSS coating and also to provide numerous high-speed conductive paths for the electron transportation from the substrate to the PEDOT:PSS coating, and the PEDOT:PSS adhered on the TiO2/SnO2 skeleton mainly acts as the catalyst to enlarge its surface area allowing for more active sites for the tri-iodide reduction.

Conjugated Polymer-Sensitized Solar Cells Based on Electrospun Tio2 Nanofiber Electrode

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

Improving of the Photovoltaic Characteristics of Dye-Sensitized Solar Cells Using a Photoelectrode with Electrospun Porous TiO2 Nanofibers

Low-Cost Fabrication of TiO2 Nanorod Photoelectrode for Dye-sensitized Solar Cell Application

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Electrospun Ytterbium and Europium Ions Co-Doped Stannic Oxide Nanofibers and Application in Dye-Sensitized Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

A dye-sensitized solar cell based on natural photosensitizers and a PEDOT:PSS/TiO2 film as a counter electrode

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

Electrospinning of Cu Doped TiO2 Nanofibers and their Potential Application in Photoanode of Dye-Sensitized Solar Cells

A three-dimensional conducting oxide hollow nanobead photoanode: synthesis, characterization, and applications in dye-sensitized solar cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Anatase Mesoporous Tio2 Nanofibers with High Surface Area for Solid-State Dye-Sensitized Solar Cells

Dissymmetric interface design of SnO2/TiO2 side-by-side bi-component nanofibers as photoanodes for dye sensitized solar cells: Facilitated electron transport and enhanced carrier separation

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

TiO 2 nanoparticle seeds transformed into nanotubes for effective dye-sensitized solar cell application

An 8.07% Efficient Fiber Dye-Sensitized Solar Cell Based on a TiO2 Micron-Core Array and Multilayer Structure Photoanode