Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

An Analog Adaptive Reference Generation Readout Integrated Circuit for Baseline-Free Gas Sensor Measurements

Baseline Calibration Scheme Embedded in Single-Slope ADC for Gas Sensor Applications

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

Low-power and cost-effective readout circuit design for compact semiconductor gas sensor systems

A 23.8-Bit ENOB, ±5V Input Range Readout Circuit for High Precision Sensor Applications with 173.7Db-Fom

A High Linearity Detection Circuit with Constant Detection Voltage for Resistive Gas Sensor

Low-Noise and Process Variation-Tolerant Readout Circuit for Electrochemical Sensors

A Programmable Interface Circuit for MOS Gas Sensor Array

A High-Resolution Interface Circuit Based on Resistance-to-Frequency Conversion for Resistive Gas Sensor

Miniaturised Infrared Spectrophotometer for Low Power Consumption Multi-Gas Sensing

A Radiation Detection Readout Circuit with Current Feedback Baseline Holder

A Two-Stage Method for Real-Time Baseline Drift Compensation in Gas Sensors

A multichannel readout integrated circuit with column-wise pseudo differential extended counting ADCs for an uncooled infrared focal plane array based on silicon diodes

An Implantable Readout Circuit with On-Chip Reference Buffer for the Detection of Biological Electrical Signals Employing Artificial Intelligence Algorithms to Compensate and Calibrate

The Design of a Low-Noise, High-Speed Readout-Integrated Circuit for Infrared Focal Plane Arrays

An Energy-Efficient and Reconfigurable Sensor IC for Bio-Impedance Spectroscopy and ECG Recording

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

A High Reliability 500 Μw Resistance-to-Digital Interface Circuit for SnO2 Gas Sensor IoT Applications

A Comprehensive Methodology for Optimizing Read-Out Timing and Reference DAC Offset in High Frame Rate Image Sensing Systems

A Bio-Impedance Readout IC with Digital-Assisted Baseline Cancellation for Two-Electrode Measurement.

Ultralow-Power Single-Sensor-Based E-Nose System Powered by Duty Cycling and Deep Learning for Real-Time Gas Identification