Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

A High Reliability 500 Μw Resistance-to-Digital Interface Circuit for SnO2 Gas Sensor IoT Applications

ZnO nanowires grown on SOI CMOS substrate for ethanol sensing

From Ceramic Tube to Microcantilever: A New Strategy for Low Power, Fast Heating and High Integrated Metal Oxide Semiconductor Gas Sensor

A High-Resolution Interface Circuit Based on Resistance-to-Frequency Conversion for Resistive Gas Sensor

Integration of SnO2 Nanoparticles with Micro-hotplatform for Low-power-consumption Gas Sensors

A Programmable Interface Circuit for MOS Gas Sensor Array

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

A Low Power Bridge-Type Gas Sensor with Enhanced Sensitivity to Ethanol by Sandwiched ZnO/Au/ZnO Film Sputtered in O₂ Atmosphere

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

A Low Power Cantilever-Based Metal Oxide Semiconductor Gas Sensor

Low-Power Consumption IGZO Memristor-Based Gas Sensor Embedded in an Internet of Things Monitoring System for Isopropanol Alcohol Gas

A Novel Low Power Hexagonal Gas Sensor Cell for Multi-Channel Gas Detection

Monolithic Integrated Cmos-Mems Mos Type Gas Sensor And Novel Heater For Sensitivity And Power Consumption Enhancement

Single-Layer-Electrode Temperature-Modulated SNO2 Gas Sensor Cell with Low Power Consumption for Discrimination of Food Odors

Low-power and cost-effective readout circuit design for compact semiconductor gas sensor systems

A High Linearity Detection Circuit with Constant Detection Voltage for Resistive Gas Sensor

Room temperature sensing of volatile organic compounds using hybrid SnO nanoflower and Laser-Induced Graphitic carbon devices

Ultralow-Power Single-Sensor-Based E-Nose System Powered by Duty Cycling and Deep Learning for Real-Time Gas Identification

Ultra-compact dual-channel integrated CO2 infrared gas sensor

Design and Fabrication of MOS Type Gas Sensor with Vertically Integrated Heater Using CMOS-MEMS Technology

Pulse-Driven MEMS NO2 Sensors Based on Hierarchical In2O3 Nanostructures for Sensitive and Ultra-Low Power Detection