Abstract:Recently, aluminum–air batteries have attracted great interest owing to their high output energy density, low cost, and feasibility to store and transport Al metal. However, the commercial application is still hindered by the lack of a high-performance air cathode, where the oxygen reduction reaction (ORR) happens, requiring fast charge transfer and mass transport at the catalyst–electrolyte–air interface. Herein, we report an aerophilic air cathode featuring both high intrinsic catalytic activity and large three-phase interface to facilitate air transport, which is prepared by growing cobalt-embedded and nitrogen-doped carbon nanotube (CoNCNT) arrays on carbon fiber paper and then modifying surface wettability with polytetrafluoroethylene solution. The optimized air electrode during the ORR shows a high onset potential of 0.95 V and fast current increase of 342.96 mA cm<sup>–2</sup> V<sup>–1</sup>, which is comparable to the commercial 20 wt % Pt/C, and has even better stability under the same conditions. Moreover, the aluminum–air battery with the aerophilic air electrode is superior to the battery with a commercial Pt/C electrode or aerophobic electrode in terms of maximum power density and long discharging durability. Bubble behavior measurement shows that aerobic wettability plays an important role in gas transport, thus controlling ORR efficiency of the air electrode. The concept of the gas-wettable electrode proves to be effective in the enhancement of oxygen reduction kinetics and would be also adapted in other gas-involved electrodes for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00837</a>.Elemental mapping images and C 1s XPS spectrum of CoNCNTs/CP; basic bubble contact angle results on different PTFE-modified CoNCNTs/CP; ORR polarization curves under different conditions and K-L plots of 0.8-CoNCNTs, Pt/C and CoNCNTs; CV curves at different scan rates of 0.8-CoNCNTs/CP, Pt/C, and CoNCNTs/CP; electrolyte droplet contact angles on 0.8-CoNCNTs/CP after the long-term reaction; optical pictures of the self-assembled Al–air battery; possible application demonstration; and table of relative atomic contents in CoNCNTs/CP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00837/suppl_file/am1c00837_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Techno-economically feasible beverage can as superior anode in rechargeable Al-air batteries

FeCo nanoparticles wrapped in N-doped carbon derived from Prussian blue analogue and dicyandiamide as efficient oxygen reduction electrocatalysts for Al-air batteries

Interface Engineering of Co3Fe7-Fe3C Heterostructure As an Efficient Oxygen Reduction Reaction Electrocatalyst for Aluminum-Air Batteries

Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum–Air Batteries

Iron and boron-doped carbonized zeolitic imidazolate frameworks as efficient oxygen reduction electrocatalysts for Al-Air batteries

Integrated and Binder‐Free Air Cathodes of Co 3 Fe 7 Nanoalloy and Co 5.47 N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Integrated and Binder‐Free Air Cathodes of Co3Fe7 Nanoalloy and Co5.47N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery

On an Easy Way to Prepare Highly Efficient Fe/N-co-doped Carbon Nanotube/nanoparticle Composite for Oxygen Reduction Reaction in Al–air Batteries

Design of Fe and Cu bimetallic integration on Nitrogen-containing microporous graphene-like carbon via a hard-template-assisted strategy as an oxygen reduction catalyst for Al-air batteries

ZnS anchored on porous N, S-codoped carbon as superior oxygen reduction reaction electrocatalysts for Al-air batteries

NaCl-assisted Synthesis of 2D Hexagonal FeNC Nanosheets as Efficient Oxygen Reduction Catalyst for Metal-air Batteries

Rechargeable Zn–Air Batteries with Outstanding Cycling Stability Enabled by Ultrafine FeNi Nanoparticles-Encapsulated N-Doped Carbon Nanosheets as a Bifunctional Electrocatalyst

N-doped porous carbon hollow microspheres encapsulated with iron-based nanocomposites as advanced bifunctional catalysts for rechargeable Zn-air battery

Space-confined Synthesis of CoNi Nanoalloy in N-doped Porous Carbon Frameworks As Efficient Oxygen Reduction Catalyst for Neutral and Alkaline Aluminum-Air Batteries

Assembled hollow spheres with CoFe alloyed nanocrystals encapsulated in N, P-doped carbon nanovesicles: An ultra-stable bifunctional oxygen catalyst for rechargeable Zn-air battery

FeCo/FeCoP encapsulated in N, Mn-codoped three-dimensional fluffy porous carbon nanostructures as highly efficient bifunctional electrocatalyst with multi-components synergistic catalysis for ultra-stable rechargeable Zn-air batteries

Novel Route to Fe‐Based Cathode As an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Transitional metal alloyed nanoparticles entrapped into the highly porous N-doped 3D honeycombed carbon: A high-efficiency bifunctional oxygen electrocatalyst for boosting rechargeable Zn-air batteries

Novel Fe2.55Sb2 alloy nanoparticles incorporated in N-doped carbon as a bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries

Enhancing ORR/OER active sites through lattice distortion of Fe-enriched FeNi3 intermetallic nanoparticles doped N-doped carbon for high-performance rechargeable Zn-air battery