Tunable and broadband coherent perfect absorption by ultrathin black phosphorus metasurfaces

Tianjing Guo,Christos Argyropoulos

DOI: https://doi.org/10.1364/JOSAB.36.002962

2019-11-25

Abstract:Tianjing Guo, Christos Argyropoulos Black phosphorus (BP), a relatively new plasmonic two-dimensional material, offers unique photonic and electronic properties. In this work, ... [J. Opt. Soc. Am. B 36, 2962-2971 (2019)]

What problem does this paper attempt to address?

Tunable anisotropic absorption in monolayer black phosphorus using critical coupling

Tingting Liu,Xiaoyun Jiang,Huaixing Wang,Yong Liu,Chaobiao Zhou,Shuyuan Xiao

DOI: https://doi.org/10.7567/1882-0786/ab6270

IF: 2.819

2019-12-24

Applied Physics Express

Abstract:We present a monolayer black phosphorus (BP)-based metamaterial structure for tunable anisotropic absorption in the mid-infrared. Based on the critical coupling mechanism of guided resonance, the structure realizes the high absorption efficiency of 99.65% for TM polarization, while only 2.61% at the same wavelength for TE polarization due to the intrinsic anisotropy of BP. The absorption characteristics can be flexibly controlled by changing critical coupling conditions, including the electron doping of BP, geometric parameters and incident angles of light. The results show feasibility in designing high-performance BP-based optoelectronic devices with spectral tunability and polarization selectivity.

physics, applied
Tunable Anisotropic Perfect Enhancement Absorption in Black Phosphorus-Based Metasurfaces

Bin Tang,Niegang Yang,Li Huang,Jiangbin Su,Chun Jiang

DOI: https://doi.org/10.1109/jphot.2020.2987157

IF: 2.4

2020-06-01

IEEE Photonics Journal

Abstract:In this work, we theoretically propose an anisotropic metasurface absorber, unit cell of which consists of a continuous monolayer black phosphorus (BP) sheet, sandwiched between a circular silver ring and a dielectric layer stacking on a silver substrate. Numerical results reveal that perfect enhancement absorption can be achieved in both armchair and zigzag directions, in which the resonant absorption peaks occur at different wavelengths due to the anisotropic property of BP. The calculated results by finite-difference time domain (FDTD) simulations have a good agreement with the coupled-mode theory. The physical mechanism of the perfect absorption is attributable to the critical coupling effect. Furthermore, the anisotropic perfect absorber not only exhibits tunable characteristics by varying the electron doping concentration, but also shows a wide-angle tolerance. In addition, our proposed absorber can achieve an arbitrary number of absorption bands by setting a suitable thickness of the dielectric layer. These results may have great potential applications in spectral imaging and photodetectors in the mid-infrared region.

engineering, electrical & electronic,optics,physics, applied
Tunable perfect absorber based on black phosphorus/bowtie shaped cavity hybrid metasurface

boxun Li,Yi Wei,Lili Zeng,Mingliang Liu,Ruquan Wen,Xingjiao Zhang,Chaosheng Deng

DOI: https://doi.org/10.1039/d3cp01871g

IF: 3.3

2023-06-17

Physical Chemistry Chemical Physics

Abstract:The practical application of black phosphorus (BP) is limited by its low absorption characteristics. In this work, we propose a perfect absorber based on BP and bowtie shaped cavity, which has high tunability and excellent optical performance. This absorber effectively increases the light-matter interaction and achieves perfect absorption by using a monolayer BP and a reflector to form a Fabry-Perot cavity. We study the influence of structural parameters on the absorption spectrum and realize the adjustment of frequency and absorption in a certain range. Applying an external electric field on the surface of BP by electrostatic gating, we can change its carrier concentration to control its optical properties. In addition, we can flexibly tune the absorption and Q-factor by varying the polarization direction of incident light. This absorber has promising applications in optical switches, sensing, and slow light, which provides a new perspective for the practical application of BP and a foundation for future research, offering possibilities for more applications.

chemistry, physical,physics, atomic, molecular & chemical
Tuning Two-Dimensional Hyperbolic Plasmons in Black Phosphorus

Edo van Veen,Andrei Nemilentsau,Anshuman Kumar,Rafael Roldan,Mikhail I. Katsnelson,Tony Low,Shengjun Yuan

DOI: https://doi.org/10.1103/physrevapplied.12.014011

IF: 4.6

2019-01-01

Physical Review Applied

Abstract:Black phosphorus presents a very anisotropic crystal structure, making it a potential candidate for hyperbolic plasmonics, characterized by a permittivity tensor where one of the principal components is metallic and the other dielectric. Here we demonstrate that atomically thin black phosphorus can be engineered to be a hyperbolic material operating in a broad range of the electromagnetic spectrum from the entire visible spectrum to ultraviolet. With the introduction of an optical gain, a new hyperbolic region emerges in the infrared. The character of this hyperbolic plasmon depends on the interplay between gain and loss along the two crystalline directions.
Tunable anisotropic perfect absorption in hyperbolic metamaterials based on black phosphorous/dielectric multilayer structures

Shuyuan Xiao,Tingting Liu,Le Cheng,Chaobiao Zhou,Xiaoyun Jiang,Zhong Li,Chen Xu

DOI: https://doi.org/10.1109/JLT.2019.2914183

2019-11-04

Abstract:Black phosphorus (BP) as a promising two-dimensional material with extraordinary optical properties constitutes an excellent building block in multilayer hyperbolic metamaterials. In this work, we design a multilayer structure composed of BP/dielectric layer stacking unit cells patterned on a gold mirror and theoretically demonstrate the tunable anisotropic absorption in the infrared regime. The electric dipole resonance between the adjacent unit cells drives the structure in the critical coupling state, and impedance of the structure matches to that of free space, showing the perfect absorption for one polarization direction, while the impedance mismatch for the other polarization direction leads to only 8.2$\%$ absorption at the same wavelength. The anisotropic absorption response of the proposed structure can be attributed to the intrinsic anisotropy of BP, which exhibits few dependence on the incident angle. Furthermore, we investigate the tunable optical absorption of the proposed structure with the electron doping of BP and the geometric parameters. These results demonstrate great potentials of BP in constituting multilayer hyperbolic metamaterials, and open up avenues in designing anisotropic metadevices with tunable spectral and polarization selectivity in the infrared regime.

Physics
Polarization-Independent Perfect Absorption in Monolayer Black Phosphorus Metasurfaces at Terahertz Frequencies via Critical Coupling

Xuewen Long,Jing Bai,Yingjun Zhang,Mingshan Zhu,Xiuli Guo,Jin Wang,Weiqiang Wang,Rui Lou

DOI: https://doi.org/10.1021/acsomega.4c05203

IF: 4.1

2024-08-20

ACS Omega

Abstract:Two-dimensional (2D) materials, which possess rich underlying physical properties that can provide the potential for designing more efficient and compact optoelectronic devices, have attracted great interest among scientists. Due to the atomic-scale thickness and the anisotropy of in-plane conductivity, 2D black phosphorus (BP) exhibits a polarization-dependent absorption spectrum with low absorption, which limits its further development in polarization-independent applications such as light...

chemistry, multidisciplinary
Anisotropic perfect absorber based on black phosphorus-graphene

Boshi Wang,Tianyi Wang,Yufang Liu,Kun Yu

DOI: https://doi.org/10.1016/j.cap.2023.10.016

IF: 2.856

2024-01-01

Current Applied Physics

Abstract:Two-dimensional materials have garnered extensive attention in the realm of optical devices due to their unique physical properties. In this paper, we propose a tunable and anisotropic perfect absorber composed of anisotropic black phosphorus (BP) and isotropic graphene. The plasmon resonance of this anisotropic material and isotropic material achieves a strong anisotropic plasma response. The proposed structure demonstrates absorption of 99.73 % and 98.35 % in the x- and y-polarization directions, respectively. By adjusting the geometric parameters and the levels of doping with graphene and BP, the resonance characteristics can be effectively controlled. In addition, the robustness to incident angle and polarization sensitivity is also illustrated. Consequently, our research offers broad prospects for applications in polarization-selective and tunable high-performance devices, such as polarizers, modulators, and mid-infrared spectral imaging.

physics, applied,materials science, multidisciplinary
Tunable plasmonic hybrid photonic device based on squared graphene and black phosphorus metamaterials

Zhe Wang,Chunzhen Fan

DOI: https://doi.org/10.1016/j.diamond.2023.110475

IF: 3.806

2023-10-11

Diamond and Related Materials

Abstract:The yearning to utilize and control the captivating property of two-dimensional carbon materials has attracted plenty of attention in biosensing and optoelectronics. In this paper, we proposed a novel graphene-black phosphorus (BP) hybrid photonic device to exhibit strong absorption of 97.0 % at 12.23 μm in the x -direction and it is 93.3 % at 13.42 μm in the y -direction. Due to the surface plasmon resonance of graphene and distinctive anisotropic effective electron masses of black phosphorus along the armchair and zigzag axes, the electromagnetic coupling achieves an enhanced performance than individual graphene or BP layer. Additionally, by adjusting the Fermi energy of graphene, the doping level of BP, and the geometric parameters, the resonant absorption peaks can be tuned independently in both TE and TM polarization. The advantages of our proposed plasmonic hybrid photonic device include high anisotropic resonance, flexible tunability, great stability, and a simple design. These make it promising for applications in photodetectors , polarizers, and imaging systems.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Tunable intraband optical conductivity and polarization-dependent epsilon-near-zero behavior in black phosphorus

Souvik Biswas,William S. Whitney,Meir Y. Grajower,Kenji Watanabe,Takashi Taniguchi,Hans A. Bechtel,George R. Rossman,Harry A. Atwater

DOI: https://doi.org/10.1126/sciadv.abd4623

2020-09-02

Abstract:Black phosphorus (BP) offers considerable promise for infrared and visible photonics. Efficient tuning of the bandgap and higher subbands in BP by modulation of the Fermi level or application of vertical electric fields has been previously demonstrated, allowing electrical control of its above bandgap optical properties. Here, we report modulation of the optical conductivity below the band-gap (5-15 um) by tuning the charge density in a two-dimensional electron gas (2DEG) induced in BP, thereby modifying its free carrier dominated intraband response. With a moderate doping density of 7x10^12/cm2 we were able to observe a polarization dependent epsilon-near-zero behavior in the dielectric permittivity of BP. The intraband polarization sensitivity is intimately linked to the difference in effective fermionic masses along the two crystallographic directions, as confirmed by our measurements. Our results suggest the potential of multilayer BP to allow new optical functions for emerging photonics applications.

Optics,Applied Physics
Black Phosphorus Radio-Frequency Transistors

Han Wang,Xiaomu Wang,Fengnian Xia,Luhao Wang,Hao Jiang,Qiangfei Xia,Matthew L. Chin,Madan Dubey,Shu-jen Han

DOI: https://doi.org/10.1021/nl5029717

2014-10-15

Abstract:Few-layer and thin film forms of layered black phosphorus (BP) have recently emerged as a promising material for applications in high performance nanoelectronics and infrared optoelectronics. Layered BP thin film offers a moderate bandgap of around 0.3 eV and high carrier mobility, leading to transistors with decent on-off ratio and high on-state current density. Here, we demonstrate the gigahertz frequency operation of black phosphorus field-effect transistors for the first time. The BP transistors demonstrated here show excellent current saturation with an on-off ratio exceeding 2000. We achieved a current density in excess of 270 mA/mm and DC transconductance above 180 mS/mm for hole conduction. Using standard high frequency characterization techniques, we measured a short-circuit current-gain cut-off frequency fT of 12 GHz and a maximum oscillation frequency fmax of 20 GHz in 300 nm channel length devices. BP devices may offer advantages over graphene transistors for high frequency electronics in terms of voltage and power gain due to the good current saturation properties arising from their finite bandgap, thus enabling the future ubiquitous transistor technology that can operate in the multi-GHz frequency range and beyond.

Mesoscale and Nanoscale Physics
Broadband black phosphorus optical modulator in visible to mid-infrared spectral range

Rui Zhang,Yuxia Zhang,Haohai Yu,Huaijin Zhang,Ruinong Yang,Bingchao Yang,Zhongyuan Liu,Jiyang Wang

DOI: https://doi.org/10.48550/arXiv.1505.05992

2015-05-22

Abstract:Black phosphorous (BP), a two-dimensional (2D) material, has a direct bandgap, which fills up the bandgap lacuna left by graphene topological insulators and transition-metal dichalcogenides because of its dependence on the layers and applied strains. Theoretically, the direct and tunable band gap indicates the broadband applications in optoelectronics with high efficiencies in the spectral range from visible to mid-infrared. Here, a BP broadband optical modulator is experimentally constructed and the passively modulated lasers at 639 nm (red), 1.06 um (near-infrared) and 2.1 um (mid-infrared) are realized by using the BP optical modulator as the saturable absorber in bulk lasers. The obtained results provide a promising alternative for rare broadband optical modulators and broaden the application range of BP in photonics.

Materials Science,Optics
Black phosphorus-based anisotropic absorption structure in the mid-infrared

Tingting Liu,Xiaoyun Jiang,Chaobiao Zhou,Shuyuan Xiao

DOI: https://doi.org/10.1364/OE.27.027618

IF: 3.8

2019-11-25

Optics Express

Abstract:Tingting Liu, Xiaoyun Jiang, Chaobiao Zhou, Shuyuan Xiao Black phosphorus (BP), an emerging two-dimensional (2D) material with intriguing optical properties, forms a promising building block in ... [Opt. Express 27, 27618-27627 (2019)]

optics
Wide-angle ultrabroadband absorption in black phosphorus/dielectric multilayer anisotropic metamaterials

Ye Ming Qing,Hongfei Wang,Dangyuan Lei

DOI: https://doi.org/10.1088/2040-8986/ad3cee

IF: 2.1

2024-04-11

Journal of Optics

Abstract:An ultrabroadband far-infrared absorber is achieved using an anisotropic metamaterial composed of alternating black phosphorus (BP) and dielectric films arranged in a trapezoidal structure. We numerically demonstrate that ultrabroad bandwidths (with > 90% absorptivity) can be achieved with the strong anisotropic dielectric response of BP, namely 63.6 μm along the armchair direction and 53.6 μm along the zigzag direction. Importantly, the high absorption is maintained across a wide range of incident angles. Our simulation results align well with analytical calculations based on the effective medium theory, considering the multilayer structure as an effective homogeneous metamaterial with anisotropic permittivity. From the distribution profiles of magnetic fields, we observe tight trapping of different wavelengths at varying widths of the trapezoidal absorber, revealing the slow-light effect underlying the broadband absorption. Our study holds significant potential for device applications, such as BP-based broadband infrared photodetectors.

optics
Black Phosphorus Molybdenum Disulfide Midwave Infrared Photodiodes with Broadband Absorption-Increasing Metasurfaces

Max R. Lien,Nan Wang,Silvia Guadagnini,Jiangbin Wu,Alexander Soibel,Sarath D. Gunapala,Han Wang,Michelle L. Povinelli

DOI: https://doi.org/10.1021/acs.nanolett.3c03076

IF: 10.8

2023-10-27

Nano Letters

Abstract:Black phosphorus (BP) has been established as a promising material for room temperature midwave infrared (MWIR) photodetectors. However, many of its attractive optoelectronic properties are often observable only at smaller film thicknesses, which inhibits photodetector absorption and performance. In this work, we show that metasurface gratings increase the absorption of BP-MoS(2) heterojunction photodiodes over a broad range of wavelengths in the MWIR. We designed, fabricated, and characterized...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Ultrabroadband coherent perfect absorption with composite graphene metasurfaces

Wei Zou,Tianjing Guo,Christos Argyropoulos

DOI: https://doi.org/10.1364/oe.534828

IF: 3.8

2024-08-31

Optics Express

Abstract:Wei Zou, Tianjing Guo, Christos Argyropoulos We investigate the design and performance of a new multilayer graphene metasurface for achieving ultrabroadband coherent perfect absorption ... [Opt. Express 32, 32667-32679 (2024)]

optics
Anisotropic infrared absorption in monolayer black phosphorus metasurface with / without local oxidative effect

Naixing Feng,Jianxiang Yin,Huan Wang,Xuan Wang,Yuxian Zhang,Zhixiang Huang

DOI: https://doi.org/10.1016/j.optmat.2023.114457

IF: 3.754

2023-10-20

Optical Materials

Abstract:As one kind of anisotropic two-dimensional (2-D) layered material, the monolayer black phosphorus (BP) has ability to excite the surface plasmon resonance in the infrared spectrum , thus providing sufficient conditions for the strong light-matter interaction, so that some potential applications can be shown in the field of optoelectronics. Based on those physical properties, we design the patterned monolayer BP to achieve extremely high infrared absorption , and meanwhile use the finite element method to model the effects of factors such as n-type doping concentration, dielectric thickness, and angle of incidence light. Moreover, due to the strong anisotropic in-plane properties of monolayer BP, we analyze detailedly the absorption spectra in both the armchair and zigzag directions separately, and then understand that low-angle narrow-band absorption in the zigzag direction could be captured in that structure. The structure could achieve perfect absorption in the zigzag direction at an incidence angle of 89.3° with n-type doping concentration n = 3 × 10 13 cm −2 and medium thickness d = 4.6 μm, and the maximum absorption can reach 99.98% with the full width at half peak (FWHM) of only 0.57 μm. Considering the case on surface oxidation, it may occur some possible effects for the perfect absorption, but with our structure, the proposed narrow-band absorption still have wide applications in the sensing and light body monitoring.

materials science, multidisciplinary,optics
Ultrafast recovery time and broadband saturable absorption properties of black phosphorus suspension

Yingwei Wang,Guanghui Huang,Haoran Mu,Shenghuang Lin,Jiazhang Chen,Si Xiao,Qiaoliang Bao,Jun He

DOI: https://doi.org/10.1063/1.4930077

IF: 4

2015-08-31

Applied Physics Letters

Abstract:As a new type of two-dimensional crystal material, black phosphorus (BP) exhibits excellent electronics and optical performance. Herein, we focus on carrier relaxation dynamics and nonlinear optical properties of BP suspension. Atomic force microscopy, transmission electron microscopy, and optical transmission spectrum are employed to characterize the structure and linear optical properties of the BP. Additionally, pump-probe experiments at wavelength of 1550 nm were carried out to study the carrier dynamics in BP suspension, and ultrafast recovery time was observed (τs = 24 ± 2 fs). Furthermore, we demonstrate the saturable absorption signals by open aperture Z-scan experiments at wavelengths of 1550 nm, 532 nm, and 680 nm. The results indicate that BP has broadband saturable absorption properties and the nonlinear absorption coefficients were determined to be β2 = −0.20 ± 0.08 × 10−3 cm/GW (532 nm), β2 = −0.12 ± 0.05 × 10−3 cm/GW (680 nm), and β2 = −0.15 ± 0.09 × 10−3 cm/GW (1550 nm).

physics, applied
Broadband electro-optic polarization conversion with atomically thin black phosphorus

Souvik Biswas,Meir Y Grajower,Kenji Watanabe,Takashi Taniguchi,Harry A Atwater,Meir Y. Grajower,Harry A. Atwater

DOI: https://doi.org/10.1126/science.abj7053

IF: 56.9

2021-10-22

Science

Abstract:Metasurfaces tune polarization In photonic systems, the polarization state of light is typically manipulated with bulky components based on dielectrics and liquid crystals. Active metasurfaces now provide the possibility of shrinking the size of these components to the nanoscale. Biswas et al . demonstrate an active nanophotonic structure capable of versatile electro-optic polarization conversion. Using trilayer black phosphorus sandwiched between electrical gates forming a cavity, they show that the polarization state of light across telecommunication wavelengths can be electrically switched. Such control can be useful for a number of applications in communications, imaging, and beam steering where the wavefront of the propagating light can be actively manipulated. —ISO

multidisciplinary sciences
Optoelectronic characteristics and application of black phosphorus and its analogs

Ying-Ying Li,Bo Gao,Ying Han,Bing-Kun Chen,Jia-Yu Huo

DOI: https://doi.org/10.48550/arXiv.2102.13316

2021-02-26

Abstract:The tunable bandgap from 0.3 eV to 2 eV of black phosphorus (BP) makes it to fill the gap in graphene. When studying the properties of BP more comprehensive, scientists have discovered that many two-dimensional materials, such as tellurene, antimonene, bismuthene, indium selenide and tin sulfide, have similar structures and properties to black phosphorus thus called black phosphorus analogs. In this review, we briefly introduce preparation methods of black phosphorus and its analogs, with emphasis on the method of mechanical exfoliation (ME), liquid phase exfoliation (LPE) and chemical vapor deposition (CVD). And their characterization and properties according to their classification of single-element materials and multi-element materials are described. We focus on the performance of passively mode-locked fiber lasers using BP and its analogs as saturable absorbers (SA) and demonstrated this part through classification of working wavelength. Finally, we introduce the application of BP and its analogs, and discuss their future research prospects.

Optics,Materials Science
Black Phosphorus–Based Metamaterial Double-Band Anisotropic Absorber for Sensing Application in Terahertz Frequency

Yizhao Pan,Yuchang Li,Fang Chen,Wenxing Yang,Boyun Wang

DOI: https://doi.org/10.1007/s11468-023-01974-y

IF: 2.726

2023-08-09

Plasmonics

Abstract:In this paper, we design and study a double-band anisotropic black phosphorus (BP)-based absorber. The proposed absorber is consisting of a monolayer black phosphorus, a crystalline silicon layer, and a perfect electrical conductor (PEC). Numerical results show that the absorber has two absorption peaks both close to perfect absorption, generated due to strong magnetic resonance modes. Absorption can be adjusted by varying key parameters, such as length, width, thickness, angle of incidence, and polarization angle. Two conventional parameters, sensitivity ( S ), and figure of merit ( FOM ) are used to estimate the sensing performance, the sensitivity of the absorber can be as high as for one peak, while for another peak (RIU is the unit of the refractive index). Meantime, we also calculated the concentration sensing sensitivity, and a maximum is achieved. The proposed BP-based double-band absorber provides a basis for designing borophene-based sensor and other electronic-photonics devices.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical

Tunable and broadband coherent perfect absorption by ultrathin black phosphorus metasurfaces

Tunable anisotropic absorption in monolayer black phosphorus using critical coupling

Tunable Anisotropic Perfect Enhancement Absorption in Black Phosphorus-Based Metasurfaces

Tunable perfect absorber based on black phosphorus/bowtie shaped cavity hybrid metasurface

Tuning Two-Dimensional Hyperbolic Plasmons in Black Phosphorus

Tunable anisotropic perfect absorption in hyperbolic metamaterials based on black phosphorous/dielectric multilayer structures

Polarization-Independent Perfect Absorption in Monolayer Black Phosphorus Metasurfaces at Terahertz Frequencies via Critical Coupling

Anisotropic perfect absorber based on black phosphorus-graphene

Tunable plasmonic hybrid photonic device based on squared graphene and black phosphorus metamaterials

Tunable intraband optical conductivity and polarization-dependent epsilon-near-zero behavior in black phosphorus

Black Phosphorus Radio-Frequency Transistors

Broadband black phosphorus optical modulator in visible to mid-infrared spectral range

Black phosphorus-based anisotropic absorption structure in the mid-infrared

Wide-angle ultrabroadband absorption in black phosphorus/dielectric multilayer anisotropic metamaterials

Black Phosphorus Molybdenum Disulfide Midwave Infrared Photodiodes with Broadband Absorption-Increasing Metasurfaces

Ultrabroadband coherent perfect absorption with composite graphene metasurfaces

Anisotropic infrared absorption in monolayer black phosphorus metasurface with / without local oxidative effect

Ultrafast recovery time and broadband saturable absorption properties of black phosphorus suspension

Broadband electro-optic polarization conversion with atomically thin black phosphorus

Optoelectronic characteristics and application of black phosphorus and its analogs

Black Phosphorus–Based Metamaterial Double-Band Anisotropic Absorber for Sensing Application in Terahertz Frequency